Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: HOW TO WORK WITH SEMC PDA PHONES

  1. #11
    Administrator
    Join Date
    Feb 2010
    Posts
    18,785

    Default

    q:
    i'm updated my 8x55-based phone using OTA, however phone turned off and can't power on anymore, blinking green led, short vibration.
    i tried to reflash it, but nothing helps.

    a:
    write next script ( save commands in text file, select text file in misc edit, signed mode, press write script )

    Code:
    tawrite:000208BD00000000
    tawrite:000208FD00000000


  2. #12
    Administrator
    Join Date
    Feb 2010
    Posts
    18,785

    Default

    q:
    i'm trying to unlock msm8x55-based phone, i'm sure that procedure done properly, but i'm always receive error:

    Code:
    SIGNED MODE (USING SERVER)
    ALTERNATIVE SECURITY BYPASS ENABLED
    CFG:110000000000
     
    DETACH USB CABLE FROM PHONE
    REMOVE BATTERY FROM PHONE
    ATTACH TESTPOINT
    PRESS "READY", THEN ATTACH USB CABLE TO PHONE
     
    will use DLOAD protocol ... 
    0806010100900000
    0D1450424C5F446F776E6C6F6164657256455231
    030006
    030006
    030006
    PROCESSING ...
    REMOVE TESTPOINT NOW, THEN PRESS "READY"
     
    qcReceivePacket: can't get packet start
    IF TESTPOINT DONE OK,THIS IS NOT SUPPORTED MCU REVISION
    CAN'T LOAD IDENTIFICATION LOADER
    a:

    bad luck, that is mcu with fixed security flaw and you can not unlock,repair trim area, repair semcboot, rebuild hwconfig using altbypass method.


  3. #13
    Administrator
    Join Date
    Feb 2010
    Posts
    18,785

    Default

    phones chipset specifications ( select any model, based on this chipset, to service phone ) ( assigned by family )

    Code:
    SO-03D, Xperia Acro HD, msm8x60
    SO-02D, Xperia NX (SO-02D), msm8x60
    IS12S , Xperia Acro HD(IS12S), msm8x60
    
    SO-04D, Xperia  GX , msm8260A
    SO-05D, Xperia SX (SO-05D) , msm8260A
    
    SO-01D, Xperia PLAY (SO-01D), msm8x55
    SO-01B, Xperia X10 (SO-01B) , qsd8255
    SO-01C, Xperia arc (SO-01C), msm8x55, anzu
    SO-02C, Xperia acro (SO-02C), msm8x55, azusa
    SO-03C, Xperia ray, msm8x55
    S51SE , S51SE , msm8x55 , xperia mini , smultron
    
    xperia v branch:
    LT25i , xperia v, msm8260A  (msm8960)
    LT25c , xperia vc, msm8260A (msm8960)
    SOL21 , Xperia VL, AU by KDDI, msm8260A (msm8960)
    SO-01E, xperia AX, NTT DoCoMo, msm8260A (msm8960)
    
    xperia t branch:
    LT30, Xperia T, msm8260A (msm8960)
    LT30at, Xperia TL, msm8260A (msm8960)
    Code:
    st26_xperia_J,
    c1504_xperia_E, 
    c1505_xperia_E,
    c1604_xperia_E_dual,
    c1605_xperia_E_dual : msm7227A
    Code:
    st21_xperia_tipo,
    st23_xperia_miro : msm7225A
    Code:
    c6502_xperia_zl,
    c6503_xperia_zl,
    c6506_xperia_zl,
    c6602_xperia_z,
    c6603_xperia_z : apq8064+mdm9xxx
    
    c5302_xperia_sp,
    c5303_xperia_sp
    C5306__xperia_sp: msm8260A (msm8960T)
    
    c2104_xperia_L
    c2105_xperia_L : msm8230


  4. #14
    Administrator
    Join Date
    Feb 2010
    Posts
    18,785

    Default

    About alternative security bypass unlock for st21,st21i2,st23,st26,c1504,c1505,c1604,c1605 phones

    1. select proper phone model
    2. check signed mode + altbypass + do full unlock
    3. press unlock and follow program instructions

    Our users tested all supported phones - and every phone was unlocked

    To prevent possible problems, in second step, when setool2 ask you to power on phone, disconnect cable from phone, power on phone FULLY, wait at least 30 seconds to allow sluggish android fully start up, then enable USB debugging and only then connect phone.

    if root procedure will fail ( hang on "Please wait ...." for long time or abort with error ) please press "stop" button and repeat procedure.
    it it will fail again, please fill complain with identify output , flash phone with different firmware version and retry.

    notice :
    - phone will NOT have network until procedure will complete
    - you CAN root phone with any other tool BEFORE attempt to process it with setool2
    - pretty please remove any resident antiviruses, malware monitors, spy programs,debuggers and so on before operation.

    processed phone CAN be flashed with any other 3rd-party tools, which using original sony loaders.
    processed phone CAN be flashed with SEUS
    processed phone CAN NOT be FOTA upgraded
    processed phone WILL have UNLOCKED fastboot ( unlocked bootloader )

    you CAN NOT flash or fix octopus-processed phones using this setool2 version.
    setool2 will refuse to process such phones.
    you should wait, until they get my proper patches and integrate it into their software with security units rebuild.
    finally, until i'll have reliable way to fix such phones without need to have live phone, i'll not enable IMEI change.

    your phone will not be killed and will be unlocked, in šāʾAllāh


Similar Threads

  1. HOW TO WORK WITH A2-BASED PHONES
    By the_laser in forum F.A.Q.
    Replies: 6
    Last Post: 04-27-2012, 05:11 PM
  2. HOW TO WORK WITH SEMC ODM PHONES
    By the_laser in forum F.A.Q.
    Replies: 7
    Last Post: 03-25-2011, 05:03 PM
  3. HOW TO WORK WITH A1-BASED PHONES
    By the_laser in forum F.A.Q.
    Replies: 5
    Last Post: 02-06-2010, 09:04 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •