GUI v0.91380023
- readflash fixed
- some very internal problem fixed, hopefully damned exists will disappear.
- updated rest files
- added w550 gdfs in ssw format
download from support area.
GUI v0.91380023
- readflash fixed
- some very internal problem fixed, hopefully damned exists will disappear.
- updated rest files
- added w550 gdfs in ssw format
download from support area.
a k510 is appeared on emma, that means - phone is retail now.
i don't have that phone yet, but i looked at its firmwares and noticed that it is same as 810/530.
so, i think that you can use it with current setool2 version, selecting model as w810/z530.
all current flashes is on support, rest files is attached.
current version on support updated with new rest files too.
password for rest files is "****zulea"
GUI v0.91380024
- added experimental support for j220/j230 phones. not tested (i have not phone ), but must work. i put only pair of flashes for test. after (not) successful tests will add all other.
- fixed incorrect work of command "readpkg","readdir" when single root directory specified.
- rest files package synched with current rest files
- edit
redownload version from support, j230 was not recognized, now must be ok.
GUI v0.91380025
- fixed "readdir" command
- full support for w700 added
- from now on restoration files will be distributed separate from main distribute. that is done for cases when only main or only rest files updated.
(you need BOTH rest files package and main package)
ps.
you CAN flash w700 fw into k750.
but no single advantage and you will lose camera
even if manually replace camera driver - it still refuses to work.
GUI v0.91380027
- finally j220/j230 fully working and tested (read codes/read flash/flash firmware)
J230_R5J complete firmware pack uploaded on support.
tomorrow will upload complete pack for j220
J230_R5H complete firmware pack uploaded on support.
GUI v0.91380028
- on some systems "protection error" appears, while older versions work ok. must be fixed.
- some lowlevel tuning
edit:
last-chance bug was found and fixed.
just redownload version from support.
GUI v0.91380029
- changed gui slightly - added CDA dropdown listbox. warning, cda list is saved when window closed (quit button)
- again some ll tuning.
uploaded all w600i/c flashfiles which present on emma3, rest files package updated.
GUI v0.91380030
- there was a problem - if you checked "unlock after flash" and flash lg3g red41/42/54, after flash phone was dead (need to unlock with tp afterward). that issue was fixed , it works like designed now.
- internal rebuilds, preparing for db2020 unlock and flash support.
IMPORTANT INFORMATION
SEMC, by error, released some number (BIG) of BROWN w700 with LOCKED OTP
when flashing, that phones will produce such errors:
YOU NEED TO FLASH SPECIAL EROM from eroms\w700red_erom.ssw.cry and AFTER flashing that erom repeat complete sequence.Code:....... CSloader version: 060118 0312 EMPCXC1327364_COMPACT_SEMC_CS_LOADER loader startup: executed wrong responce, break. loader filesystem startup failed, that is fatal
flashing any other EROMs will bring you to testpoint.
Bookmarks