Page 4 of 31 FirstFirst ... 2345614 ... LastLast
Results 31 to 40 of 302

Thread: UPDATES AND NEWS

  1. #31
    Administrator
    Join Date
    Feb 2010
    Posts
    18,785

    Default

    GUI v0.91380023

    - readflash fixed
    - some very internal problem fixed, hopefully damned exists will disappear.
    - updated rest files
    - added w550 gdfs in ssw format


    download from support area.

  2. The Following 12 Users Say Thank You to the_laser For This Useful Post:


  3. #32
    Administrator
    Join Date
    Feb 2010
    Posts
    18,785

    Default

    a k510 is appeared on emma, that means - phone is retail now.
    i don't have that phone yet, but i looked at its firmwares and noticed that it is same as 810/530.
    so, i think that you can use it with current setool2 version, selecting model as w810/z530.

    all current flashes is on support, rest files is attached.

    current version on support updated with new rest files too.

    password for rest files is "****zulea"

  4. The Following 12 Users Say Thank You to the_laser For This Useful Post:


  5. #33
    Administrator
    Join Date
    Feb 2010
    Posts
    18,785

    Default

    GUI v0.91380024

    - added experimental support for j220/j230 phones. not tested (i have not phone ), but must work. i put only pair of flashes for test. after (not) successful tests will add all other.

    - fixed incorrect work of command "readpkg","readdir" when single root directory specified.

    - rest files package synched with current rest files

    - edit
    redownload version from support, j230 was not recognized, now must be ok.

  6. The Following 12 Users Say Thank You to the_laser For This Useful Post:


  7. #34
    Administrator
    Join Date
    Feb 2010
    Posts
    18,785

    Default

    GUI v0.91380025

    - fixed "readdir" command
    - full support for w700 added
    - from now on restoration files will be distributed separate from main distribute. that is done for cases when only main or only rest files updated.
    (you need BOTH rest files package and main package)

    ps.
    you CAN flash w700 fw into k750.
    but no single advantage and you will lose camera
    even if manually replace camera driver - it still refuses to work.

  8. The Following 12 Users Say Thank You to the_laser For This Useful Post:


  9. #35
    Administrator
    Join Date
    Feb 2010
    Posts
    18,785

    Default

    GUI v0.91380027

    - finally j220/j230 fully working and tested (read codes/read flash/flash firmware)

  10. The Following 12 Users Say Thank You to the_laser For This Useful Post:


  11. #36
    Administrator
    Join Date
    Feb 2010
    Posts
    18,785

    Default

    J230_R5J complete firmware pack uploaded on support.
    tomorrow will upload complete pack for j220

  12. The Following 12 Users Say Thank You to the_laser For This Useful Post:


  13. #37
    Administrator
    Join Date
    Feb 2010
    Posts
    18,785

    Default

    J230_R5H complete firmware pack uploaded on support.

  14. The Following 12 Users Say Thank You to the_laser For This Useful Post:


  15. #38
    Administrator
    Join Date
    Feb 2010
    Posts
    18,785

    Default

    GUI v0.91380028

    - on some systems "protection error" appears, while older versions work ok. must be fixed.
    - some lowlevel tuning

    edit:

    last-chance bug was found and fixed.
    just redownload version from support.

  16. The Following 11 Users Say Thank You to the_laser For This Useful Post:


  17. #39
    Administrator
    Join Date
    Feb 2010
    Posts
    18,785

    Default

    GUI v0.91380029

    - changed gui slightly - added CDA dropdown listbox. warning, cda list is saved when window closed (quit button)
    - again some ll tuning.

    uploaded all w600i/c flashfiles which present on emma3, rest files package updated.

  18. The Following 12 Users Say Thank You to the_laser For This Useful Post:


  19. #40
    Administrator
    Join Date
    Feb 2010
    Posts
    18,785

    Default

    GUI v0.91380030

    - there was a problem - if you checked "unlock after flash" and flash lg3g red41/42/54, after flash phone was dead (need to unlock with tp afterward). that issue was fixed , it works like designed now.

    - internal rebuilds, preparing for db2020 unlock and flash support.


    IMPORTANT INFORMATION

    SEMC, by error, released some number (BIG) of BROWN w700 with LOCKED OTP

    when flashing, that phones will produce such errors:


    Code:
    .......
    CSloader version:
    060118 0312 EMPCXC1327364_COMPACT_SEMC_CS_LOADER
    loader startup: executed
    wrong responce, break.
    loader filesystem startup failed, that is fatal
    YOU NEED TO FLASH SPECIAL EROM from eroms\w700red_erom.ssw.cry and AFTER flashing that erom repeat complete sequence.

    flashing any other EROMs will bring you to testpoint.

  20. The Following 12 Users Say Thank You to the_laser For This Useful Post:


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •