-
02-05-2010, 11:19 AM
#111
v0.91380069
- profiles now correctly load settings for models when switching only tabs.
- return to old scheme cid/color detection for db2020 usb operations (some users reports that phone COLOR/CID can't be detected)
- added some models (w880,k550) so yes, yes. you must again remade profiles.
- db2020 empyboard filling supported (because i saw my "friend" on kukuruzer
takes money for that,while it is standalone process and not requires any special moves, that is unfair and i shall fix it). quick howto:
-go to empty tab
-select ANY db2020 model
-fill desired IMEI (or not fill if you have not want to write it)
-check WRITE OTP (or not check if you not want to write it)
-select CID49 (required)
-select needed brown2red erom
-press FLASH
-phone now complete retail (especially if you wrote otp) and must be serviced as any retail db2020 phone (note - NOT USE EROM UPGRADE)
-
The Following 6 Users Say Thank You to the_laser For This Useful Post:
-
02-05-2010, 11:19 AM
#112
v0.91380071
first, and most important news.
you are not required now to register on support or use login/password to login on support area.
all you need - download software from www.setool.net, install drivers and press GO SUPPORT button.
- added some missed models...
- fixed some cosmetic bugs
-
The Following 7 Users Say Thank You to the_laser For This Useful Post:
-
02-05-2010, 11:19 AM
#113
v0.91380072
- made 5-times retry of each AT-query during csca unlock step2 (should help when phone drivers installation not finished)
- locks tab not works correctly when USB was used as selected interface
- some cosmetic fixes
-
The Following 7 Users Say Thank You to the_laser For This Useful Post:
-
02-05-2010, 11:19 AM
#114
v0.91380073
- changed csca unlock step1 behaviour. now, if there is ANY *.seczone files in %setool2%\backup\%imei%\ folder,step1 (erasing locks and writing signature) is skipped and step2 executing immediately. That is done to prevent credit loss if on step2 phone drivers installed incorrectly or if server connection broken on previous attempt of step2.
if you ABSOLUTELY know what are you doing - you can erase *.seczone files from %setool2%\backup\%imei% and step1 will be executed again for that phone.
- added "dummy battery" option for UFS cables with "crocodile" or otherwise called "dummy battery". if you check that option - before each phone shutdown we will execute grace delay to allow phone loader finish its work (for example, without that option you CAN get a "configuration error" on phones after flashing them using UFS and cable with dummy battery). grace period length is 5 seconds by default, but it can be changed with option "ufs_dummy_delay" in [main] section of setool2.ini (period counted in ms, so ufs_dummy_delay=5000 is 5 seconds)
- very minor ui bugfixes.
-
The Following 7 Users Say Thank You to the_laser For This Useful Post:
-
02-05-2010, 11:19 AM
#115
v0.91380075
Thursday, 22 March 2007
- added db2020 cid52 server support (flash,erom upg,usercode reset, network unlock (when we will restore server functionality))
- added db2012 cid51 server support ( flash,usercode reset, network unlock)
- added pnx5230 (Z310) cid51 server support (flash,usercode reset, identify NOT supported yet,network unlock (when we will restore server functionality))
- now all simlock types displayed in identify (state shown only if lock is locked)
- changed .ini file handling, so you must again rebuild settings. now settings for phones COMMON for all windows, beware. from now on settings will be intact when new models will be added.
- added new phone model names
- many internal changes,so please check for bugs.
w200 r1gb001 cid51 firmware uploaded
z310 r1jc002 cid51 firmware uploaded
k610 cid52 firmwares uploaded
k800 cid52 firmwares uploaded
w850 cid52 firmwares uploaded
db2020_firmware_in_gdfs_format added in distr.rar for completely blank boards. phones.rar updated with z310 driver for csca unlock
IMPORTANT ADDON. SADLY TO SAY (BLAME ME) -I NOT CAREFULLY ENOUGH
LOOKED AT Z310 - SO - DO NOT NETWORK UNLOCK Z310 - IT WILL BE DEAD.
OF COURSE, YOU CAN ALWAYS RESTORE IT TO "LIVE" WITH SECURITY BACKUP,
WHICH IS DONE AUTOMATICALLY IN "BACKUP\%IMEI%\%IMEI%_%DATETIME%.SECZONE"
YOU NEED WRITE IT AS SCRIPT.
-
The Following 7 Users Say Thank You to the_laser For This Useful Post:
-
02-05-2010, 11:20 AM
#116
v0.91380076
Monday, 26 March 2007
- corrected pnx5230 (z310) CSCA handling to prevent log loss and phone "damage". once again i remind that pnx5230 using same security as db2020 and we limited now to flashing and userlock reset (until we find some way to run server)
- included cid49_51_to_cid52 conversion. better not use it... really.
WARNING. DUE MISTAKE, FIRST 076 VERSION WAS
RELEASED WITH SERIAL CHECK ROUTINE ENABLED.
IT IS REPLACED NOW WITH "NORMAL" VERSION.
SO EVERYBODY, WHO DOWNLOADED 076 AND RECEIVED
"WRONG SERIAL" ERROR - REDOWNLOAD DISTRIBUTIVE.
SORRY FOR THAT AND THX FOR UNDERSTANDING
K810 r1kc001 CID52 firmware and customization packs uploaded
K790 r1cc003 CID52 firmware uploaded
K790 r1cg001 CID52 firmware uploaded
K790 r1eg001 CID52 firmware uploaded
K790 r1gb001 CID52 firmware uploaded
K790 r1jc002 CID52 firmware uploaded
K790 r1jg001 CID52 firmware uploaded ( K790 customization packs updated. )
-
The Following 6 Users Say Thank You to the_laser For This Useful Post:
-
02-05-2010, 11:22 AM
#117
v0.91380077
Tuesday, 17 April 2007
- "err: 10" error when z530 recovery operation executed fixed.
- customization packs now parsed when selected (shows language info,etc)
- added phonebook extraction from gdfs .bin format dump (NOT SSW).
usage is simple: select .bin file into misc. files edit, gdfs will be
parsed and .vcf file will be created.
phonebook unit is courtesy of PANUA, thx to him.
- all CID>50 now assumed to be used with auth dongle, to prevent credits loss.
- identify working now on USB interface
(in some cases reduced loaders are used, warning is displayed in such case)
- some other not important fixes (bugs ? )
-
The Following 5 Users Say Thank You to the_laser For This Useful Post:
-
02-05-2010, 11:22 AM
#118
v0.91380079
Wednesday, 9 May 2007
- added cid 49/50/51 alternative security bypass for db2012/db2020 phones.
what that means ? that means, you can unlock with flash patch
ALL cid49/50/51 DB2012/DB2020 phones.
all you need - VALID ACCOUNT WITH 1 (ONE) LOG, click here to see credits resellers
check "user server" and "use alternative security bypass",
then press desired operation.
of course, scripts is FULLY supported in THAT MODE.
-
The Following 6 Users Say Thank You to the_laser For This Useful Post:
-
02-05-2010, 11:22 AM
#119
v0.91380080
Saturday, 12 May 2007
- db2012 com/ufs csloader operations (i.e. "complete")
was broken on normal speeds (dcu60 interface worked ok).
that is fixed.
- a lot of users, when doing "erom upgrade"
(required to avoid err:30 on altbypass), forget to uncheck
"alt bypass" option and lose logs without result.
altbypass is ignored now when doing "recovery".
so far no other bugs were discovered.
-
The Following 6 Users Say Thank You to the_laser For This Useful Post:
-
02-05-2010, 11:22 AM
#120
v0.91380081
Saturday, 12 May 2007
- db2010 cid50/51 phones must work okay now
(do main+fs+custpack+unlock_after_flash combo if there is no rest files)
- more "foolproof" work with "alternative security bypass" option added
- some cosmetic things.
-
The Following 6 Users Say Thank You to the_laser For This Useful Post:
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks