NTool releases and news

[the_laser]

Anyone with setool2 credits can test NTool

1 credit for flashing
1 credit for bootloader unlock generation

supported any HMD smartphone - nokia 1,2,3,5,6,6.1,7,7 plus,8

so far supported :

- flashing of original .NB0 files or original unpacked .NB0
!!! make sure you using proper firmwares for your phone model !!!

- FRP reset

- bootloader unlock signature generation
!!! make sure you double check IMEI and SERIAL NUMBER BEFORE REQUEST !!!

instructions to use bootloader unlock signature :

install fastboot drivers for phone.
power off phone.

run
fastboot -i 0x2e04 flash unlock <signature file>
connect phone to cable
run
fastboot -i 0x2e04 oem unlock-go
follow instructions on phone display if any

- EDL and BROM boot repair not supported yet, it is planned in next versions - so carefully check firmwares and not remove cable during procedure.

- ALWAYS connect powered off phone !!!
If phone in FASTBOOT mode - connect phone to cable, start operation, then press and hold volume up + power buttons until phone restart !!!

[the_laser]

NTool v0.022

- support for .NBx firmwares added
  please UNZIP firmwares before flashing - select only .NB0, NBx, .MLF - do not attempt to select .zip or whatever else.

[the_laser]

NTool v0.025

- support for IMEI/MAC/BT repair of Nokia2,Nokia5,Nokia6,Nokia6.1,Nokia7,Nokia7 plus, Nokia8 Sirocco added 
  instuctions are simple : 
  - make sure you do not have any other applications, which can use ADB,like samsung companion,other tools
  - install NOKIA HMD drivers from Drivers folder ( this should be done once, of course )
  - press "SERVICE" button
  - connect POWERED OFF phone
  - wait, until "WRITE" button will appear, correct IMEI/MAC/BT addresses and press "WRITE" button
  - do not do anything on phone during process ;)

1 credit for flashing/service ( charged once for one phone )
1 credit for bootloader unlock generation ( charged each time )

if NTool will "stuck" on step "reboot to factory mode" and there is no device appear in device manager, reflash phone with firmware from support area.

[the_laser]

NTool v0.026

- bootloader unlock signature generation not worked, fixed

[the_laser]

NTool v0.028

- service operation working now for Nokia1, Nokia3, Nokia 8 phones ( Nokia X6 supported, but not tested )
  for Nokia 8 service operation, phone must be flashed with Android 8.x firmware
- service operation can work now on Android 7.x firmware for Nokia2, Nokia5, Nokia6 phones
- number of bugfixes, mostly internal

[the_laser]

NTool v0.029

- Android P preview firmware ( B2N-3050-0-00WW-B02 ) for Nokia 7 plus can't be flashed with NTool.  Fixed.

[the_laser]

Important !

From 11.06.2018 SETool2 credits will not work for NTool anymore, only NTool credits will work for NTool.
if you downloaded NTool not from NTool support site, then make sure that your NTool.ini looks like :

[main]
server=srv01.dontexist.com
port=8814

[the_laser]

due to human error i'm set credits cost wrongly, so one phone flashing/service cost was 20 credits instead of 10.
all wrongly taken credits returned to respective accounts

b01vgpvkn
b01vi3jus
b03of0agd
b04pbqsap
m01_yo3wix
m02_dzynhj
m02_u1hwfs
m04_bceyut
s01_dggyre
s01_y8pjjf
s02_auaemo
s02_dy7rgh
s05_yidzze
s07_kzszbi
s09_hv19ph
s09_rqqsuv

sorry for issue

[the_laser]

NTool v0.030

- Nokia 3.1 ( codename ES2 ) support added
- support for SHARP AQUOS S2 added ( untested )
- some not important bugfixes

[the_laser]

NTool v0.032

- support for Sharp.Aquos.S2.FS8010 ( service functions require android 8.x firmware )
- support for Sharp.Aquos.S2 PLUS.FS8016 ( service functions require android 8.x firmware )
- support for Sharp.Aquos.S3Mini.FS8018 ( after service function  you need to reboot phone manually with volume up+power button )
- support for Sharp.Aquos.Z3.FS8009 ( bootloader unlock signature is NOT available for this model )