Page 27 of 31 FirstFirst ... 172526272829 ... LastLast
Results 261 to 270 of 302

Thread: UPDATES AND NEWS

  1. #261
    Administrator
    Join Date
    Feb 2010
    Posts
    18,785

    Default

    notice regarding 14.2.A.0.290 firmware.

    boot update is implemented in current setool2 version and it is uploaded on support area on 11.01.2014
    boot update was tested by few guys, who experienced problems with xperia z1 phones after flashing ( null imei ) and their problem was fixed.
    but i'm not yet tested flashing of dread 14.2.A.0.290 firmware,though it should be okay now, as the only problem was missing boot update procedure.
    i'll wait for my c690x phone and will test this firmware personally.

    in any way, i'm strongly advice to anyone redownload current setool2 version from support area,if setool2g.exe size NOT 3841536 bytes, at least to prevent fixed problem with null imei after flashing with xperia z1//xperia z ultra.

    And if any brave soul ( or maybe very big phone distributor/seller ) will attempt to use 14.2.A.0.290 firmware with this fixup... well, it will be just great


  2. #262
    Administrator
    Join Date
    Feb 2010
    Posts
    18,785

    Default

    v1.1405

    Code:
    - boot update procedure implemented, this will prevent dead phones/no imei phones 
      during firmware upgrade/downgrade procedure. Officially approved now on my own z1 phone.
    - added msm8226 phones support
    - fixed bug "can't get S1 hdr" during boot of some phones
    - fixed zlib bug : firmware will not be flashed, if there is not enough space on hard disk, error will be reported.
    RapidShare Link


  3. #263
    Administrator
    Join Date
    Feb 2010
    Posts
    18,785

    Default

    v1.1406

    Code:
    - added msm8210 phones support ( D20xx_XPERIA E1,  etc )
    - added msm8974ab phones support ( D65xx_XPERIA Z2, etc )
    - due to multiple requests, added IMEI change procedure for msm722xA phones.  Cost is 2 credits. 
      procedure is very same as msm8x55-based phones :
      options : signed mode + altbypass mode + perform full unlock + allow to change  , procedure : unlock/repair
    
      Restrictions : 
      1. after IMEI change you will not be able to flash phone with anything other, than setool2
      2. you MUST unlock phone after IMEI change ( can be done in one step ) , so total cost is 2+2 credits.
      3. you must reflash phone or perform factory reset from phone service menu to bring new IMEI in effect.
      4. if anything will go wrong, you will receive dead phone, which can only be recovered by jtag tools.
    RapidShare Link


  4. #264
    Administrator
    Join Date
    Feb 2010
    Posts
    18,785

    Default

    v1.1407

    Code:
    - some loaders updated to current versions. 
    - now you can unlock/repair/rebuild hwconfig m1_aspen. Check docs\s1_qualcomm_uart_cables for uart pinout.
      better later, than never, hehe.
    RapidShare Link


  5. #265
    Administrator
    Join Date
    Feb 2010
    Posts
    18,785

    Default

    v1.1408

    Code:
    - some loaders updated to current versions. 
    - better simlock information display for s1 phones
    - small cosmetic fixes
    RapidShare Link


  6. #266
    Administrator
    Join Date
    Feb 2010
    Posts
    18,785

    Default

    Due to market situation unlock/hwconfig rebuild for Sony msm722xA-based phones ( st21,st23,st26,c15xx,c16xx ) cost 0 credits from today, positive credit balance required.

    Smartcard should have activated standalone unlock/hwconfig for 2010,2011 sony ericsson phones.
    You can check if your card have this option by running updater with default username updater/updater.

    Soon i'll release new smartcard update and setool2 version, which will support standalone unlock/hwconfig rebuild for Sony msm722xA-based phones.

    Update will be free, of course, for users, who activated standalone unlock/hwconfig for 2010,2011 sony ericsson phones.


  7. #267
    Administrator
    Join Date
    Feb 2010
    Posts
    18,785

    Default

    Support server offline - hoster became bankrupt.

    read details, how to get firmwares, while we setup new support area.


  8. #268
    Administrator
    Join Date
    Feb 2010
    Posts
    18,785

    Default

    v1.1409

    Code:
     Implemented boot restore for msm8x10 phones using EDL mode. 
      
     There was ~10 reports that xperia_e1 phones for unknown reason lose s1boot after successful flashing.
     Now you can repair boot of such phones :
    
     Select check signed mode + altbypass mode, select "D20xx_XPERIA E1" as model, 
     Add to fw area corresponding APP,eLabel,FSP,CDF and press flash.
       
     When you prompted to attach/detach testpoint - just press "ready"

    RapidShare Link


  9. #269
    Administrator
    Join Date
    Feb 2010
    Posts
    18,785

    Default

    v1.1410

    Code:
    - alternative security bypass for SEMC PDA's was broken, fixed.
    RapidShare Link


  10. #270
    Administrator
    Join Date
    Feb 2010
    Posts
    18,785

    Default

    v1.1411

    Code:
    - alternative security bypass for SEMC PDA's was not fixed fully. should be fine now.
    Download Link


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •