Page 1 of 4 123 ... LastLast
Results 1 to 10 of 36

Thread: NTool releases and news

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Administrator
    Join Date
    Feb 2010
    Posts
    18,786

    Default NTool releases and news

    Anyone with setool2 credits can test NTool

    1 credit for flashing
    1 credit for bootloader unlock generation

    supported any HMD smartphone - nokia 1,2,3,5,6,6.1,7,7 plus,8

    so far supported :

    - flashing of original .NB0 files or original unpacked .NB0
    !!! make sure you using proper firmwares for your phone model !!!

    - FRP reset

    - bootloader unlock signature generation
    !!! make sure you double check IMEI and SERIAL NUMBER BEFORE REQUEST !!!

    instructions to use bootloader unlock signature :

    Code:
    install fastboot drivers for phone.
    power off phone.
    
    run
    fastboot -i 0x2e04 flash unlock <signature file>
    connect phone to cable
    run
    fastboot -i 0x2e04 oem unlock-go
    follow instructions on phone display if any
    - EDL and BROM boot repair not supported yet, it is planned in next versions - so carefully check firmwares and not remove cable during procedure.

    - ALWAYS connect powered off phone !!!
    If phone in FASTBOOT mode - connect phone to cable, start operation, then press and hold volume up + power buttons until phone restart !!!


  2. #2
    Administrator
    Join Date
    Feb 2010
    Posts
    18,786

    Default

    NTool v0.022

    Code:
    - support for .NBx firmwares added
      please UNZIP firmwares before flashing - select only .NB0, NBx, .MLF - do not attempt to select .zip or whatever else.

  3. The Following 21 Users Say Thank You to the_laser For This Useful Post:


  4. #3
    Administrator
    Join Date
    Feb 2010
    Posts
    18,786

    Default

    NTool v0.025


    Code:
    - support for IMEI/MAC/BT repair of Nokia2,Nokia5,Nokia6,Nokia6.1,Nokia7,Nokia7 plus, Nokia8 Sirocco added 
      instuctions are simple : 
      - make sure you do not have any other applications, which can use ADB,like samsung companion,other tools
      - install NOKIA HMD drivers from Drivers folder ( this should be done once, of course )
      - press "SERVICE" button
      - connect POWERED OFF phone
      - wait, until "WRITE" button will appear, correct IMEI/MAC/BT addresses and press "WRITE" button
      - do not do anything on phone during process ;)
    1 credit for flashing/service ( charged once for one phone )
    1 credit for bootloader unlock generation ( charged each time )

    if NTool will "stuck" on step "reboot to factory mode" and there is no device appear in device manager, reflash phone with firmware from support area.

  5. The Following 24 Users Say Thank You to the_laser For This Useful Post:


  6. #4
    Administrator
    Join Date
    Feb 2010
    Posts
    18,786

    Default

    NTool v0.026


    Code:
    - bootloader unlock signature generation not worked, fixed

  7. The Following 16 Users Say Thank You to the_laser For This Useful Post:


  8. #5
    Administrator
    Join Date
    Feb 2010
    Posts
    18,786

    Default

    NTool v0.028

    Code:
    - service operation working now for Nokia1, Nokia3, Nokia 8 phones ( Nokia X6 supported, but not tested )
      for Nokia 8 service operation, phone must be flashed with Android 8.x firmware
    - service operation can work now on Android 7.x firmware for Nokia2, Nokia5, Nokia6 phones
    - number of bugfixes, mostly internal

  9. The Following 8 Users Say Thank You to the_laser For This Useful Post:


  10. #6
    Administrator
    Join Date
    Feb 2010
    Posts
    18,786

    Default

    NTool v0.029

    Code:
    - Android P preview firmware ( B2N-3050-0-00WW-B02 ) for Nokia 7 plus can't be flashed with NTool.  Fixed.

  11. The Following 15 Users Say Thank You to the_laser For This Useful Post:


  12. #7
    Administrator
    Join Date
    Feb 2010
    Posts
    18,786

    Default

    Important !

    From 11.06.2018 SETool2 credits will not work for NTool anymore, only NTool credits will work for NTool.
    if you downloaded NTool not from NTool support site, then make sure that your NTool.ini looks like :

    Code:
    [main]
    server=srv01.dontexist.com
    port=8814

  13. The Following 5 Users Say Thank You to the_laser For This Useful Post:


  14. #8
    Administrator
    Join Date
    Feb 2010
    Posts
    18,786

    Default

    due to human error i'm set credits cost wrongly, so one phone flashing/service cost was 20 credits instead of 10.
    all wrongly taken credits returned to respective accounts

    Code:
    b01vgpvkn
    b01vi3jus
    b03of0agd
    b04pbqsap
    m01_yo3wix
    m02_dzynhj
    m02_u1hwfs
    m04_bceyut
    s01_dggyre
    s01_y8pjjf
    s02_auaemo
    s02_dy7rgh
    s05_yidzze
    s07_kzszbi
    s09_hv19ph
    s09_rqqsuv
    sorry for issue

  15. The Following 3 Users Say Thank You to the_laser For This Useful Post:


  16. #9
    Administrator
    Join Date
    Feb 2010
    Posts
    18,786

    Default

    NTool v0.030

    Code:
    - Nokia 3.1 ( codename ES2 ) support added
    - support for SHARP AQUOS S2 added ( untested )
    - some not important bugfixes

  17. The Following 2 Users Say Thank You to the_laser For This Useful Post:


  18. #10
    Administrator
    Join Date
    Feb 2010
    Posts
    18,786

    Default

    NTool v0.032

    Code:
    - support for Sharp.Aquos.S2.FS8010 ( service functions require android 8.x firmware )
    - support for Sharp.Aquos.S2 PLUS.FS8016 ( service functions require android 8.x firmware )
    - support for Sharp.Aquos.S3Mini.FS8018 ( after service function  you need to reboot phone manually with volume up+power button )
    - support for Sharp.Aquos.Z3.FS8009 ( bootloader unlock signature is NOT available for this model )

  19. The Following 2 Users Say Thank You to the_laser For This Useful Post:


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •