UPDATES AND NEWS

[the_laser]

v0.91373018

returned to old version of execryptor. GUI v0.91380009

- added FULL RED CID49 NO TESTPOINT support for NEW W500/W600, NEW K600/V600/K608, W900, see notes below
- updated "direct flash patching" for new sharp 703/903 firmwares
- testpoint usage allowed on sharp phones now
- testpoint usage reduced during operations
- added profiles support
- added "phone id" button (test cable, recognize phone cid,etc)
- slightly tuned ignition on ufs/com/dss - must be better
- fixed imei changing problem on w550/w600 in no-tp mode.
- some other internal modifications
- new bugs (unknown yet)

notes on REDCID49 support.

first. it must work only on non-touched (new) phones.
if phone was "tuned" with other software - no any warranty, but, generally, it should work.

second.
during ANY operations red49 phone became unusable (dead) until you flash so-called "restoration" file or flash "main" part of phone flash.

i prepared restoration files for most versions of red49 firmwares,they resides in "rest" folder of setool2 distribution.

usage of restoration file is simple. just determine your firmware version and select corresponding restoration file in "restoration file" edit.

if your unlucky and there is no restoration file for yours version of firmware, then you must fullflash phone (WITHOUT TOUCH TO GDFS AREA), just main+fsimage+complete.

third.
during flashing w900 phones on some (i think most) com cables, CHECK option "disable USB" - phone somehow assumes it is on usb, but it is on com

fourth.
well, no more to say - go, try, cry or enjoy. preliminary beta testing shows
good percentage of success (99.9%)


some example:

q: i have red49 w550, i don't know what firmware version inside, i want it unlocked and russian.

a:
go to semc tab.
press clear names.
select needed w550 flashfiles (main,fsimage). russian inside emea1
go to settings tab. CHECK complete. CHECK "unlock after flash". UNCHECK "revert to red.
go to semc tab, press flash
when prompted, remove and insert battery, press button "testpoint ok"
phone must be unlocked and flashed.


q: i have k600, i want to unlock it, i know that inside r2ae001 version.

a:
select in "restoration file" edit correct restoration file.
press unlock.
when prompted, remove and insert battery, press button "testpoint ok"
phone must be unlocked and restored, means - working.


NOTES ON PROFILES

button "S" saves all files and settings for current model.
button "L" restores saved files and settings from current model.

profiles works on sharp,lg,semc tabs.
profiles common for all windows.


enjoy, friends.

ps.
as usual, my personal **** to zuko. you can steal, but you can't create.
my personal greetings to mighty lead, who defeated upcoming db2020.
hope you will at least laungh on my cid49 method and show us, how to do red49 properly.

and my personal ask to all mighty hackers - please, stay aside from setool. better hack something more interesting