Results 1 to 10 of 40

Thread: FAQ from MOBILE-FILES.COM

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #16
    Super Moderator
    Join Date
    Feb 2010
    Location
    MySQL
    Posts
    41

    Default

    Q:
    i trying to service w810/w300/z530/z550/k310/k510 phone and getting
    such result
    Code:
    ChipID:8040,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    ldr_on_ldr hdr no ack,err:10
    what to do ? phone was working before !!! (variant: phone was dead before)

    A:

    that is hardware problem and nothing to do with software. usually it is bad soldered flash chip.
    latest mid-range semc phones quality is below zero.


    as last resort, you can try to raise voltage on FLASH VPP upto 12v
    (for start, try to flash it with dcu60, it also has increased voltage)

    but what say to customer if phone works before servicing?
    have no idea - think yourself- that is risk that you including in each service cost.
    sadly, but such thing can be happened - flash sector can read good, but fails on erase/write.


    Q:
    i trying to service w810/w300/z530/z550/k310/k510 phone and getting
    such result

    Code:
    Loader:060718 0842 LIE_DB2010_FLASHLOADER_R2A003_CXC1326738
    OTP LOCKED:1 CID:49 PAF:1 IMEI:00000000000000 CERT:RED
    
    REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
    THEN PRESS 'TESTPOINT OK'
    
    Open COM port OK
    ChipID:8040,EMP protocol:0301
    PHONE IS RED RETAIL PRODUCT
    FLASH CID detected:49
    Speed:921600
    Trying to launch embedded bootloader...
    Abort all operations.
    embedded bootloader not responds !
    Elapsed:46 secs.
    phone has damaged EROM.
    solution - make reset procedure.

  2. The Following 5 Users Say Thank You to GSM™ For This Useful Post:


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •