HOW TO WORK WITH SEMC PDA PHONES

[the_laser]

FLASHING OF S1-OPEN PDA PHONES (Satio,Vivaz,Vivaz pro)

download needed firmware package.
add it to firmware area on PDA tab.
DO NOT UNPACK .ZIP PACKAGE, JUST ADD IT AS IS.
on settings,check "signed mode"
press flash

connect turned off phone while holding "green" button.

FLASHING OF S1-ANDROID PDA PHONES (x10,x10 mini,x10 mini pro,etc)

download needed firmware package.
( two main files,both REQUIRED. APP - OS kernel, radio part, FSP - user and android OS system data,
CDF - internal storage contents, eLabel - electronic label )
add it to firmware area on PDA tab.
Order is IMPORTANT - ALWAYS add APP part first, then FSP, then eLabel, then CDF
Some MT-based phones can be irreversible killed, if APP part is NOT first package to flash.

UNPACK package archive, if packed (unzip,unrar, but DO NOT unpack *.sin_file_set itself ), ADD *.file_set to firmware area
on settings,check "signed mode"
press flash

connect turned off phone while holding "BACK" button.