HOW TO WORK WITH SEMC PDA PHONES

[the_laser]

UNLOCKING OF A1-BASED PDA PHONES

if you want to UNLOCK NEW SECURITY phone -

check "use server" and enter your login/password.
please check FAQ article about credit consumptions for your phone.

press unlock button and insert cable to phone,while holding appropriate key on phone.
follow program directions.

if you want to UNLOCK OLD SECURITY phone -

UNCHECK "use server".
BE SURE you have latest REST files.

now, you need install drivers for flashing.
for that, poweron smartphone in fw update mode.

- for p990/m600 press and hold "@" on TURNED OFF phone, then attach dcu60.
- for w950 press and hold "C" on TURNED OFF phone, then attach dcu60.

windows will ask you for a drivers. drivers in %setool2 dist%\drivers\Smartphone_Drivers

now, when all preparations finished - press unlock button and insert cable to phone,while holding appropriate key on phone.
follow program directions.

[the_laser]

UNLOCKING OF S1-OPEN PDA PHONES

select USB as interface. that is REQUIRED.
select phone model
settings - check ONLY "signed mode (using server)", "do full unlock instead of usercode reset", fill your login details.

back to original tab, press unlock, "GREEN BUTTON"

if signature is calculated - you will receive 'SUCCESS' response, otherwise you will receive error code.
if calculation is success, then signature will be saved in backup\%imei% folder in your setool2 directory.
next, backup will be created so you will be able to restore phone if something will go wrong.
procedure will continue,phone will be switched off and unlocked.
remember, if something will go wrong - you have a backup of security units.
please check "credits consumption" FAQ post for info about number of credits.


UNLOCKING OF S1-ANDROID PDA PHONES

server based full official unlock method. Only available, when s1 signature server online

select USB as interface. that is REQUIRED.
select phone model
settings - check ONLY "signed mode (using server)", "do full unlock instead of usercode reset", fill your login details.

back to original tab, press unlock, hold "BACK BUTTON" and insert cable to powered off phone.

if signature is calculated - you will receive 'SUCCESS' response, otherwise you will receive error code.
if calculation is success, then signature will be saved in backup\%imei% folder in your setool2 directory
(following unlock attempts, if something had happen with phone - cable disconnect,etc - during unlock - will be free as long as signature remains there )

next, backup will be created so you will be able to restore phone if something will go wrong.
procedure will continue,phone will be switched off and unlocked.
remember, if something will go wrong - you have a backup of security units.
please check "credits consumption" FAQ post for info about number of credits.

server based full unlock method using alternative security bypass

please read that post


GESTURE LOCK/USER PASSWORD RESED FOR S1-ANDROID PDA PHONES

check signed mode only, press unlock.
hold "BACK BUTTON" and insert cable to powered off phone.

if phone has blocked attempts counter, then you need reflash phone after lock reset.