Results 1 to 10 of 14

Thread: HOW TO WORK WITH SEMC PDA PHONES

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Administrator
    Join Date
    Feb 2010
    Posts
    18,862

    Default

    About alternative security bypass unlock for st21,st21i2,st23,st26,c1504,c1505,c1604,c1605 phones

    1. select proper phone model
    2. check signed mode + altbypass + do full unlock
    3. press unlock and follow program instructions

    Our users tested all supported phones - and every phone was unlocked

    To prevent possible problems, in second step, when setool2 ask you to power on phone, disconnect cable from phone, power on phone FULLY, wait at least 30 seconds to allow sluggish android fully start up, then enable USB debugging and only then connect phone.

    if root procedure will fail ( hang on "Please wait ...." for long time or abort with error ) please press "stop" button and repeat procedure.
    it it will fail again, please fill complain with identify output , flash phone with different firmware version and retry.

    notice :
    - phone will NOT have network until procedure will complete
    - you CAN root phone with any other tool BEFORE attempt to process it with setool2
    - pretty please remove any resident antiviruses, malware monitors, spy programs,debuggers and so on before operation.

    processed phone CAN be flashed with any other 3rd-party tools, which using original sony loaders.
    processed phone CAN be flashed with SEUS
    processed phone CAN NOT be FOTA upgraded
    processed phone WILL have UNLOCKED fastboot ( unlocked bootloader )

    you CAN NOT flash or fix octopus-processed phones using this setool2 version.
    setool2 will refuse to process such phones.
    you should wait, until they get my proper patches and integrate it into their software with security units rebuild.
    finally, until i'll have reliable way to fix such phones without need to have live phone, i'll not enable IMEI change.

    your phone will not be killed and will be unlocked, in šāʾAllāh


Similar Threads

  1. HOW TO WORK WITH A2-BASED PHONES
    By the_laser in forum F.A.Q.
    Replies: 6
    Last Post: 04-27-2012, 05:11 PM
  2. HOW TO WORK WITH SEMC ODM PHONES
    By the_laser in forum F.A.Q.
    Replies: 7
    Last Post: 03-25-2011, 05:03 PM
  3. HOW TO WORK WITH A1-BASED PHONES
    By the_laser in forum F.A.Q.
    Replies: 5
    Last Post: 02-06-2010, 09:04 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •