HOW TO WORK WITH SEMC ODM PHONES

[the_laser]

UNLOCKING OF SEMC ODM PHONES

broadcom based - z300,j210,j220

1. select model
2. select com/ufs as interface
3. uncheck all settings
4. press unlock
5. power on phone with unsupported sim card, press *<<*, enter readed codes.

if you have "not allowed" while entering codes, just reflash phone

calypso lite based - j110,j120,k200,k220

1. select model
2. select com/ufs as interface
3. uncheck all settings
4. press unlock

for k200,k220 this is full unlock and security zone will be automatically fixed.
for j110,j120 this is special firmware patch - after unlock, power on phone, press *<<* with unsupported card and enter any 8 digits as code for each lock.
phone will accept code and unlock will be permanent.

note, that j110,j120 phones with damaged security zone are not supported.