PDA

View Full Version : NTool releases and news



the_laser
04-23-2018, 02:37 PM
Anyone with setool2 credits can test NTool (https://mega.nz/#F!Qt0gmIhJ!IsPqnXMJB-TKQpxZq5aKQA)

1 credit for flashing
1 credit for bootloader unlock generation

supported any HMD smartphone - nokia 1,2,3,5,6,6.1,7,7 plus,8

so far supported :

- flashing of original .NB0 files or original unpacked .NB0
!!! make sure you using proper firmwares for your phone model !!!

- FRP reset

- bootloader unlock signature generation
!!! make sure you double check IMEI and SERIAL NUMBER BEFORE REQUEST !!!

instructions to use bootloader unlock signature :



install fastboot drivers for phone.
power off phone.

run
fastboot -i 0x2e04 flash unlock <signature file>
connect phone to cable
run
fastboot -i 0x2e04 oem unlock-go
follow instructions on phone display if any

- EDL and BROM boot repair not supported yet, it is planned in next versions - so carefully check firmwares and not remove cable during procedure.

- ALWAYS connect powered off phone !!!
If phone in FASTBOOT mode - connect phone to cable, start operation, then press and hold volume up + power buttons until phone restart !!!

the_laser
04-26-2018, 01:39 PM
NTool v0.022



- support for .NBx firmwares added
please UNZIP firmwares before flashing - select only .NB0, NBx, .MLF - do not attempt to select .zip or whatever else.

the_laser
05-01-2018, 05:25 PM
NTool v0.025




- support for IMEI/MAC/BT repair of Nokia2,Nokia5,Nokia6,Nokia6.1,Nokia7,Nokia7 plus, Nokia8 Sirocco added
instuctions are simple :
- make sure you do not have any other applications, which can use ADB,like samsung companion,other tools
- install NOKIA HMD drivers from Drivers folder ( this should be done once, of course )
- press "SERVICE" button
- connect POWERED OFF phone
- wait, until "WRITE" button will appear, correct IMEI/MAC/BT addresses and press "WRITE" button
- do not do anything on phone during process ;)


1 credit for flashing/service ( charged once for one phone )
1 credit for bootloader unlock generation ( charged each time )

if NTool will "stuck" on step "reboot to factory mode" and there is no device appear in device manager, reflash phone with firmware from support area.

the_laser
05-18-2018, 11:06 AM
NTool v0.026 (https://mega.nz/#F!Qt0gmIhJ!IsPqnXMJB-TKQpxZq5aKQA)




- bootloader unlock signature generation not worked, fixed

the_laser
05-26-2018, 11:11 AM
NTool v0.028 (https://mega.nz/#F!Qt0gmIhJ!IsPqnXMJB-TKQpxZq5aKQA)



- service operation working now for Nokia1, Nokia3, Nokia 8 phones ( Nokia X6 supported, but not tested )
for Nokia 8 service operation, phone must be flashed with Android 8.x firmware
- service operation can work now on Android 7.x firmware for Nokia2, Nokia5, Nokia6 phones
- number of bugfixes, mostly internal

the_laser
05-27-2018, 12:34 PM
NTool v0.029 (https://mega.nz/#F!Qt0gmIhJ!IsPqnXMJB-TKQpxZq5aKQA)



- Android P preview firmware ( B2N-3050-0-00WW-B02 ) for Nokia 7 plus can't be flashed with NTool. Fixed.

the_laser
06-07-2018, 12:09 PM
Important !

From 11.06.2018 SETool2 credits will not work for NTool anymore, only NTool credits will work for NTool.
if you downloaded NTool not from NTool support site, then make sure that your NTool.ini looks like :



[main]
server=srv01.dontexist.com
port=8814

the_laser
06-09-2018, 01:24 PM
due to human error i'm set credits cost wrongly, so one phone flashing/service cost was 20 credits instead of 10.
all wrongly taken credits returned to respective accounts



b01vgpvkn
b01vi3jus
b03of0agd
b04pbqsap
m01_yo3wix
m02_dzynhj
m02_u1hwfs
m04_bceyut
s01_dggyre
s01_y8pjjf
s02_auaemo
s02_dy7rgh
s05_yidzze
s07_kzszbi
s09_hv19ph
s09_rqqsuv


sorry for issue

the_laser
06-11-2018, 09:54 AM
NTool v0.030 (https://mega.nz/#F!Qt0gmIhJ!IsPqnXMJB-TKQpxZq5aKQA)



- Nokia 3.1 ( codename ES2 ) support added
- support for SHARP AQUOS S2 added ( untested )
- some not important bugfixes

the_laser
06-14-2018, 10:23 PM
NTool v0.032 (https://mega.nz/#F!Qt0gmIhJ!IsPqnXMJB-TKQpxZq5aKQA)



- support for Sharp.Aquos.S2.FS8010 ( service functions require android 8.x firmware )
- support for Sharp.Aquos.S2 PLUS.FS8016 ( service functions require android 8.x firmware )
- support for Sharp.Aquos.S3Mini.FS8018 ( after service function you need to reboot phone manually with volume up+power button )
- support for Sharp.Aquos.Z3.FS8009 ( bootloader unlock signature is NOT available for this model )

the_laser
06-15-2018, 11:43 PM
bootloader unlock added for Sharp Z3 - just flash VN3-UnlockBootloader.NBx.zip from NTool support area.
Warning - all data will be erased.

the_laser
07-04-2018, 11:24 AM
NTool v0.034 (https://mega.nz/#F!Qt0gmIhJ!IsPqnXMJB-TKQpxZq5aKQA)



- workaround for FRP reset/service/reflash operations, when active partition is not Slot_A
- fixed problem with Nokia 8 NB1 IMEI2 repair

the_laser
07-06-2018, 02:03 AM
NTool v0.035 (https://mega.nz/#F!Qt0gmIhJ!IsPqnXMJB-TKQpxZq5aKQA)



- added experimental unlock code calculation for next HMD smartphones :

Nokia 1
Nokia 2
Nokia 3
Nokia 3.1
Nokia 5
Nokia 6
Nokia 6.1
Nokia 7
Nokia 7 Plus
Nokia 8
Nokia 8 Sirocco
Nokia X6

Just fill IMEI and press "SIM UNLOCK" button, then enter calculated code, if server will be able to calculate it for you.
Please note, that phone must be working and ask unlock code, as we will not return credits for unlock code calculation.

unlock code generation cost is 30 credits and only allowed for accounts with at least 200 credits

the_laser
07-14-2018, 01:14 PM
NTool v0.036 (https://mega.nz/#F!Qt0gmIhJ!IsPqnXMJB-TKQpxZq5aKQA)



- flashing engine revised for Android P firmwares
- added SKUID change to service functions

the_laser
07-31-2018, 07:15 PM
NTool v0.037 (https://mega.nz/#F!Qt0gmIhJ!IsPqnXMJB-TKQpxZq5aKQA)



- Fixed issue, when original IMEI was restored after OTA update.
Just rewrite required IMEI1/IMEI2 with this version, no credits required ( account balance should be non-zero )

the_laser
09-28-2018, 11:24 PM
NTool v0.038 (https://mega.nz/#F!Qt0gmIhJ!IsPqnXMJB-TKQpxZq5aKQA)



- Nokia 2.1 support added
- Nokia 5.1 support added

the_laser
11-07-2018, 05:10 PM
NTool v0.039 (https://mega.nz/#F!Qt0gmIhJ!IsPqnXMJB-TKQpxZq5aKQA)



- "service" working now with Android 9 firmwares

the_laser
11-16-2018, 03:09 PM
NTool v0.040 (https://mega.nz/#F!Qt0gmIhJ!IsPqnXMJB-TKQpxZq5aKQA)



- Nokia 5.1 Plus support added
- Nokia 7.1 support added

the_laser
01-21-2019, 05:13 AM
NTool v0.043 (https://mega.nz/#F!Qt0gmIhJ!IsPqnXMJB-TKQpxZq5aKQA)



- Nokia 3.1 Plus support added
- fixed Nokia 5.1 Plus FRP reset/Service functions with 2.xxx ( Android 9 ) firmwares



if you have bricked Nokia 5.1 Plus phone using FRP/Service functions and NTool<0.043,
here is how to fix it :

1. download from NTool support area Nokia 5.1 Plus folder archive BootFix.zip
2. unpack it to any folder, better c:\bootfix
3. follow README.TXT inside extracted folder


if you want to DOWNGRADE Nokia 5.1 plus phone with Android 9 firmware ( ver 2.xxx )
then you MUST flash PDA_2XXX_Downgrade.NBx file first, then you are free to flash lower firmware versions.

Otherwise you will need to repair boot.

the_laser
02-01-2019, 06:29 PM
NTool v0.044 (https://mega.nz/#F!Qt0gmIhJ!IsPqnXMJB-TKQpxZq5aKQA)



- fixed Nokia 5/6 FRP reset with 6.xxx ( Android 9 ) firmwares. Service for this firmware version not available, you need to downgrade.



if you have bricked Nokia 5/6 phone using FRP/Service functions and NTool<0.044,
here is how to fix it :


in order to connect : start FRP operation, then connect phone to cable and enter download mode next way :

hold volume up+volume down+power, after few seconds phone will vibrate and restart, still hold keys, and IMMEDIATELY after second vibrate release all buttons

the_laser
02-18-2019, 05:03 PM
NTool v0.045 (https://mega.nz/#F!Qt0gmIhJ!IsPqnXMJB-TKQpxZq5aKQA)



- Nokia 8.1 support added.
if you wish to convert chinese Nokia X7 to global, you must change SKUID to 600WW.

the_laser
03-13-2019, 03:10 PM
Important !

If you have nokia 3.1 plus phone with firmare 2.xxx (android 9) DO NOT perform service/reset frp functions - phone wil became brick.

we will release fix and support for 2.xxx firmwares soon.

you can check firmware version with identify function.

the_laser
03-20-2019, 12:02 PM
NTool v0.046 (https://mega.nz/#F!Qt0gmIhJ!IsPqnXMJB-TKQpxZq5aKQA)



- fixed Nokia 3.1 FRP reset with 3.xxx ( Android 9 ) firmwares.
Service for this firmware version not available, you need to downgrade.
Before flashing Android 8.x firmware, you MUST flash ES2_Downgrade_Android_P.NBx package

- fixed Nokia 3.1 Plus FRP reset with 2.xxx ( Android 9 ) firmwares.
If you want to flash Android 8.x firmware, you MUST flash ROO_Downgrade_Android_P.NBx package first.



if you have bricked Nokia 3.1/3.1 plus/5.1 phone using FRP/Service functions and NTool<0.046,
here is how to fix it :

download bootfix package from support site, unpack it to some folder, then run flash_tool.exe, press only "download" button, then connect damaged phone to cable while pressing both volume up+volume down buttons. Sometimes it can't boot properly from first time, just disconnect phone, press "download" button again and connect phone same way as before.

the_laser
04-11-2019, 12:03 PM
NTool v0.047 (https://mega.nz/#F!Qt0gmIhJ!IsPqnXMJB-TKQpxZq5aKQA)



- support for Nokia 5.1 3.xxx ( Android 9 ) firmwares enabled. If you want downgrade phone to Android 8.x firmware, you MUST flash CO2_Downgrade_Android_P.NBx package
- support for Nokia 2.1 1.xxx ( Android 9 ) firmwares enabled
- service support for Nokia 3.1 3.xxx ( Android 9 ) firmwares enabled

the_laser
04-24-2019, 02:12 PM
NTool v0.048 (https://mega.nz/#F!Qt0gmIhJ!IsPqnXMJB-TKQpxZq5aKQA)



- support for Nokia 1 Plus added. If "service" function do not work with your phone ( firmware v 0.0630 surely affected ) - flash ANT-0540-0-00WW-B02_Service.NBx.zip firmware
- support for Nokia 2.1 Verizon ( EVW ) added. DO NOT flash Nokia 2.1 firmware into this phone, you will need testpoint and EVW_Fixboot.zip

the_laser
05-18-2019, 10:17 AM
NTool v0.049 (https://mega.nz/#F!Qt0gmIhJ!IsPqnXMJB-TKQpxZq5aKQA)



- support for Nokia X71 added.
- support for Nokia 9 added. IMEI change is NOT possible, so do not fill IMEI, when perform service function.




it is last version of NTool without card.

all next versions will require security card.

sadly, it will still be server-based so credits will be required even with card.

however, it will allow us to develop some interesting features, like remotelock (FDP) repair ( device corrupted and will shutdown ) and IMEI change for latest phones, like Nokia 9.

all existing users will stay in server database.

the_laser
12-06-2019, 10:22 AM
Nokia Tool v0.052



- support for Android 10 firmwares added
- memory consumption decreased

the_laser
12-12-2019, 03:38 PM
Nokia Tool v0.053



- fixed RHD support ( possible EAG too )

the_laser
12-30-2019, 04:54 PM
Nokia Tool v0.054



- support for Android 10 added for FRT,NE1,B2N,AOP
- fixed "connection error" when OST software installed

the_laser
04-23-2020, 06:02 PM
Nokia Tool v0.055



- support for Android 10 added for PDA,ROO

the_laser
10-03-2020, 10:14 AM
Nokia Tool v0.056



- support for Android 10 added for ANT ( SERVICE FUNCTION NOT SUPPORTED )

the_laser
10-22-2020, 11:49 PM
Nokia Tool v0.058



- support for Android 10 added for Nokia 3.1 ( SERVICE FUNCTION NOT SUPPORTED, DOWNGRADE TO FW 3.220 )
- support for Android 10 added for Nokia 5.1 ( SERVICE FUNCTION NOT SUPPORTED, DOWNGRADE TO FW 3.220 )

the_laser
12-02-2020, 04:27 AM
Nokia Tool v0.059



- added initial support for UNISOC-based Nokia phones : firmware flashing, usercode read, factory reset
- supported models : Nokia 105, Nokia 110, Nokia 215, Nokia 220, Nokia 225, Nokia 3310 3G




for Identify, Service functions of Nokia 3310 3G phone, you must create special diagnostic cable.
it is very simple - get usual USB cable and cut PIN 1 (VBUS/VCC) line ( usually red line )




Important note for UNISOC drivers :

Before drivers install :

1.
i'm strongly recommend to uninstall all and any existing UNISOC drivers on system :

for this you can run, according to your system, either Drivers\FP_Drivers\DriverUninstall64.exe or Drivers\FP_Drivers\DriverUninstall32.exe ( as Administrator )
I'm not sure that it will uninstall older or modified UNISOC drivers, so to cleanup system completely, get RAPR (https://github.com/lostindark/DriverStoreExplorer/releases),
run it as Administrator and delete all Ports ( COM & LPT ) drivers with manufacturers "Spreadtrum","TNS", "UNISOC" ( check "Force deletion" )

2.
Nokia 3310 3G driver signed with expired certificate, so in order to install FP_Drivers_Zouk, you must restart PC with driver signature enforcement DISABLED.

How to ( for recent windows versions ) :

settings -> update and security -> recovery -> Advanced startup
after restart select "disable driver signature enforcements"

For windows 7 just press F8 during startup, then go to “Advanced Boot Options”.
and select “Disable Driver Signature Enforcements”

Only after this you can proceed with drivers installation.
Take note that signature enforcements only disabled until next reboot.


After you restarted with disabled signature enforcements, proceed with drivers installation :

There are 3 UNISOC drivers folders :

Drivers\FP_Drivers
Drivers\FP_Drivers_Zouk

inside these folders, just run setup DriverSetup.exe ( as Administrator ).
If asked, press "Install driver anyway".

Drivers\FP_Drivers_Queen

inside this folder, if you have 64-bit windows, go to amd64 and run dpinst.exe ( as Administrator )
if you have 32-bit windows, go to x86 and run dpinst.exe ( as Administrator )
If asked, press "Install driver anyway"

the_laser
02-21-2021, 06:03 PM
Nokia Tool v0.060



- added support for service functions and network unlock of UNISOC-based Nokia phones
- supported models : Nokia 105, Nokia 110, Nokia 215, Nokia 220, Nokia 225, Nokia 3310 3G




Warning !
To use service functions for Nokia 105, Nokia 110 phones, you MUST flash firmware from our support area,
otherwise phone will be in tampered state, until you write original IMEIs




Service function cost : 5 credits
Network Unlock cost : 5 credits

Warning ! Credits charged EACH time.




for Identify, Service functions of Nokia 3310 3G phone, you must create special diagnostic cable.
it is very simple - get usual USB cable and cut PIN 1 (VBUS/VCC) line ( usually red line )




Important note for UNISOC drivers :

Before drivers install :

1.
i'm strongly recommend to uninstall all and any existing UNISOC drivers on system :

for this you can run, according to your system, either Drivers\FP_Drivers\DriverUninstall64.exe or Drivers\FP_Drivers\DriverUninstall32.exe ( as Administrator )
I'm not sure that it will uninstall older or modified UNISOC drivers, so to cleanup system completely, get RAPR (https://github.com/lostindark/DriverStoreExplorer/releases),
run it as Administrator and delete all Ports ( COM & LPT ) drivers with manufacturers "Spreadtrum","TNS", "UNISOC" ( check "Force deletion" )

2.
Nokia 3310 3G driver signed with expired certificate, so in order to install FP_Drivers_Zouk, you must restart PC with driver signature enforcement DISABLED.

How to ( for recent windows versions ) :

settings -> update and security -> recovery -> Advanced startup
after restart select "disable driver signature enforcements"

For windows 7 just press F8 during startup, then go to “Advanced Boot Options”.
and select “Disable Driver Signature Enforcements”

Only after this you can proceed with drivers installation.
Take note that signature enforcements only disabled until next reboot.


After you restarted with disabled signature enforcements, proceed with drivers installation :

There are 3 UNISOC drivers folders :

Drivers\FP_Drivers
Drivers\FP_Drivers_Zouk

inside these folders, just run setup DriverSetup.exe ( as Administrator ).
If asked, press "Install driver anyway".

Drivers\FP_Drivers_Queen

inside this folder, if you have 64-bit windows, go to amd64 and run dpinst.exe ( as Administrator )
if you have 32-bit windows, go to x86 and run dpinst.exe ( as Administrator )
If asked, press "Install driver anyway"

the_laser
08-02-2021, 10:31 PM
Nokia Tool v0.061



- added support for flashing, service functions, network unlock of UNISOC-based Nokia phones
- new supported models : Nokia 105 4G, Nokia 110 4G
- added support for service functions of Nokia 1+ with Android 10, Android 11 firmwares





Notice !!!

if phone have Android 10 ( ANT-2xxx ), Android 11 ( ANT-3xxx ) firmware
then you can not use SERVICE function directly due to FIH programmers bug.

Instead, you must flash special firmware ANT-214F-0UWW-B01.NBx and then
you can use SERVICE function.

After using SERVICE functions you can use any firmware you want.