FLASHING OF SEMC S1-BASED ODM PHONES
1. select correct model
2. use com/ufs/usb as interface
3. check "signed mode"
3. add to firmware area needed firmware files
4. press flash
notes:
some old locosto s1 phones do not support USB as interface
if you want to flash brown firmware or readout, step 3 will be:
3. check "signed mode","alternative security bypass"
about SEMC S1 ODM files structure:
1. neptune-based (w302,s302,f305) , ST-Ericsson-based (w100,w150)
firmware contains 3 required parts:
you need to flash all 3 files to get phone working with desired languages.- main (ex: R1BA017_1207_9123_GENERIC_HS_YG_RED.software)
- fs (ex: R1BA017_1207_9132_FS_ADRIATIC_HS_YG_RED.software)
- customization (ex: R6A_F305_CDF_1215_9665__FS__Entel_PCS_CL.software)
F305, S302, W302 SW flash should be done without memory card inserted.
If memory card is inserted during flash the flash can fail.
If you encounter this problem,the phone does not startup correctly after flash, please wait 2-3 minutes
then reinsert the battery and start the phone again.
The phone should now start normally and the SW has been correctly updated.
Please note that the SW is flashed correctly and this will not cause any future startup problem.
2. locosto arima (t250,t280,k330,t303,r300)
contains 2 required parts
3. locosto foxconn (z250,z320,r306,j132)- main + language R5CA005_OLGA_ARIMA_AMERICA_2_CXC1251008_RED.softwa re
- customization R7A_CDA102866_307__FS__Movistar_Guatemala.software
- main R1BA008_1212_9858_MC_JIALI_RED.software
- icons R1BA011_1211_6339_ICN_JIALI_RED.software
(this files reside in archives like MODELx_FWVER_common.rar)
- fs+language R1BA008_1211_6093_MALAYSIA_JIALI_RED.software
- custpack R9A_R306_CDA_1212_6282__FS__Customized_SG.software
Bookmarks