Page 2 of 29 FirstFirst 123412 ... LastLast
Results 11 to 20 of 289

Thread: UPDATES AND NEWS

  1. #11
    Administrator
    Join Date
    Feb 2010
    Posts
    17,942

    Default

    v0.91373011


    - unblocked some cards

    users must ask Unlocker for unblocking codes.
    note, that FIRST startup after entering unblocking code is about 2 minutes long - it is okay and will happen only once.

  2. The Following 16 Users Say Thank You to the_laser For This Useful Post:


  3. #12
    Administrator
    Join Date
    Feb 2010
    Posts
    17,942

    Default

    v0.91373012

    - there was a sudden exits in any operations, fixed.

  4. The Following 14 Users Say Thank You to the_laser For This Useful Post:


  5. #13
    Administrator
    Join Date
    Feb 2010
    Posts
    17,942

    Default

    v0.91373013



    - RED49 W550/W600 no-tp flashig finalized (all operations works now and no special flashes need. warning ! not set your cid to anything <49 - phone will require testpoint to revive.

    - added all needed EROMs in EROM folder.

    - script is changed almost completely.

    new command:
    readpkg:/dir/in/phone

    makes a file package for transferring to other phones (so-called customizing )

    example:
    readpkg:/tpa/user

    new command:
    writepkg: \package\on\pc

    write previously backuped files back to phone

    example:
    writepkg:c:\package\k600\emea1.pkg

    new command:
    readdir:/starting/dir/in/phone

    extracts all files and directories from phone to ph_out/ folder in setool2 directory

    example:
    readdir:/tpa/user

    new command:
    mkdir:/dir/in/phone

    new command:
    rmdir:/dir/in/phone

    new command:
    delfile:/file/in/phone.ext

    changed command:to write a file into phone filesystem now use
    wrfile:file\on\pc,/file/in/phone



    now, short script example with explanations:

    gdfsread:00000013
    ; read gdfs block 0 unit 0x13. variable will be written as ready script.
    gdfsreadbinary:00000013
    ; read gdfs block 0 unit 0x13. variable will be written in raw binary form.
    gdfswrite:00020CBF31323334
    ; write gdfs block 2 unit 0xcbf bytes 0x31323334 (ascii 1234)
    chdir:/
    ; change dir to root
    readfile:/tpa/preset/log.txt
    ; readfile sample
    readfile:/tpa/preset/system/language/ru.lng
    ; readfile sample
    readfile:/tpa/preset/custom/customize.xml
    ; readfile sample
    chdir:/tpa
    ; change dir to /tpa
    listdirs:
    ; show all directory and filenames
    mkdir:/ifs/security/tester
    ; make directory example
    wrfile:cora.fps,/ifs/security/tester/test.txt
    ; write file .\cora.fps to /ifs/security/tester/test.txt
    makepkg:/ifs
    ; make package from /ifs directory as pkg_your_imei.pkg in current directory
    delfile:/ifs/security/tester/test.txt
    ; delete file
    rmdir:/ifs/security/tester
    ; delete directory (can only be done after all files removed)
    writepkg:test.pkg
    ; write package from test.pkg
    chdir:/ifs/security/tester
    ; chdir
    listfiles:
    ; show all files in /ifs/security/tester
    readdir:/tpa/user/
    ; extract all data to ph_out directory

  6. The Following 15 Users Say Thank You to the_laser For This Useful Post:


  7. #14
    Administrator
    Join Date
    Feb 2010
    Posts
    17,942

    Default

    v0.91373014

    - fixed error in script command readfile. thx to gezuzz.

    ( readfile:/phone/dir/filename.ext not worked as intended)

    - some minor improvements in internal code.

  8. The Following 14 Users Say Thank You to the_laser For This Useful Post:


  9. #15
    Administrator
    Join Date
    Feb 2010
    Posts
    17,942

    Default

    v0.91373015

    - fixed IMEI change for all db2010 phones. thx to igorvod for bugreport.
    - some minor improvements.

  10. The Following 13 Users Say Thank You to the_laser For This Useful Post:


  11. #16
    Administrator
    Join Date
    Feb 2010
    Posts
    17,942

    Default

    v0.91373016

    - lg u8550 (cid54) tp-less flashing (unlock via developers flash 07/08/etc)
    - some minor improvements for multi-phones operations.


    please note, you can flash ANYTHING into u8550. but once you will flash anything with certificate OTHER THAT RED54 - you will come to dead phone and only TP will cure it.

    also please note, that when software says "DAMAGED SOFTWARE, REFLASH ORIGINAL", then YOU MUST FLASH ORIGINAL UNTOUCHED U8550 RED FIRMWARE (only main file)




    EDIT- IMPORTANT - RE-DOWNLOAD SOFTWARE - CRITICAL BUG FIXED.

    thanks for imobile for fast bugreport.

  12. The Following 15 Users Say Thank You to the_laser For This Useful Post:


  13. #17
    Administrator
    Join Date
    Feb 2010
    Posts
    17,942

    Default

    v0.91373017

    - cid49 added in empty board, sorry, forgot about it.
    - progressbar is ok now (imobile, you know what i mean )


    reuploaded version, probably fixes "not-opening" problem on some systems.

  14. The Following 13 Users Say Thank You to the_laser For This Useful Post:


  15. #18
    Administrator
    Join Date
    Feb 2010
    Posts
    17,942

    Default

    v0.91373018

    returned to old version of execryptor. GUI v0.91380009

    - added FULL RED CID49 NO TESTPOINT support for NEW W500/W600, NEW K600/V600/K608, W900, see notes below
    - updated "direct flash patching" for new sharp 703/903 firmwares
    - testpoint usage allowed on sharp phones now
    - testpoint usage reduced during operations
    - added profiles support
    - added "phone id" button (test cable, recognize phone cid,etc)
    - slightly tuned ignition on ufs/com/dss - must be better
    - fixed imei changing problem on w550/w600 in no-tp mode.
    - some other internal modifications
    - new bugs (unknown yet)

    notes on REDCID49 support.

    first. it must work only on non-touched (new) phones.
    if phone was "tuned" with other software - no any warranty, but, generally, it should work.

    second.
    during ANY operations red49 phone became unusable (dead) until you flash so-called "restoration" file or flash "main" part of phone flash.

    i prepared restoration files for most versions of red49 firmwares,they resides in "rest" folder of setool2 distribution.

    usage of restoration file is simple. just determine your firmware version and select corresponding restoration file in "restoration file" edit.

    if your unlucky and there is no restoration file for yours version of firmware, then you must fullflash phone (WITHOUT TOUCH TO GDFS AREA), just main+fsimage+complete.

    third.
    during flashing w900 phones on some (i think most) com cables, CHECK option "disable USB" - phone somehow assumes it is on usb, but it is on com

    fourth.
    well, no more to say - go, try, cry or enjoy. preliminary beta testing shows
    good percentage of success (99.9%)


    some example:

    q: i have red49 w550, i don't know what firmware version inside, i want it unlocked and russian.

    a:
    go to semc tab.
    press clear names.
    select needed w550 flashfiles (main,fsimage). russian inside emea1
    go to settings tab. CHECK complete. CHECK "unlock after flash". UNCHECK "revert to red.
    go to semc tab, press flash
    when prompted, remove and insert battery, press button "testpoint ok"
    phone must be unlocked and flashed.


    q: i have k600, i want to unlock it, i know that inside r2ae001 version.

    a:
    select in "restoration file" edit correct restoration file.
    press unlock.
    when prompted, remove and insert battery, press button "testpoint ok"
    phone must be unlocked and restored, means - working.


    NOTES ON PROFILES

    button "S" saves all files and settings for current model.
    button "L" restores saved files and settings from current model.

    profiles works on sharp,lg,semc tabs.
    profiles common for all windows.


    enjoy, friends.

    ps.
    as usual, my personal **** to zuko. you can steal, but you can't create.
    my personal greetings to mighty lead, who defeated upcoming db2020.
    hope you will at least laungh on my cid49 method and show us, how to do red49 properly.

    and my personal ask to all mighty hackers - please, stay aside from setool. better hack something more interesting

  16. The Following 13 Users Say Thank You to the_laser For This Useful Post:


  17. #19
    Administrator
    Join Date
    Feb 2010
    Posts
    17,942

    Default

    v0.91380010


    - fixed IMEI changing with w900
    - tuned communications with comport, fixed NAK-errors (at least for me)
    - added "Identify" for brown phones

  18. The Following 13 Users Say Thank You to the_laser For This Useful Post:


  19. #20
    Administrator
    Join Date
    Feb 2010
    Posts
    17,942

    Default

    v0.91380011

    - fixed ufs ignition with new drivers (i tested on 3.01.04)
    - fixed identify
    - again tuned com routines
    - disabled recovery for all red49 phones (too much users killed their phones with it)
    - returned old way for w550/w600 handling


    notes on db2010 red49 support. seems, new method is half-working on db2010 phones.
    looks like old hw phones not work with new method. so, i returned old method .

    now, there is two w550 in model selection - old and new.
    try first old, then, if it will not work - try new.
    if new will not work too - sorry, only tp.

    we will research it further, but hey... we must use what we have, right ?

  20. The Following 13 Users Say Thank You to the_laser For This Useful Post:


Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •