K770 HDR block not accepted,error: 19

[maxie]

i have problem to my K770 after i recover and i spend 1 log i can't flash the phone ... any idea for this error ?


v0.915057/UNI
CARD SERIAL:xxxxxxxxxxxx
Loaded 51 flash descriptors
SIGNED MODE (USING SERVER)
CFG:100000000000
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35238402266381 CERT:N/A
FLASH CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
FLASH ID:897E
writing "G:\All Box stuff\Setool\Flash files\k770\CID 52\r8bc004\R8BC004_APP_SW_1201_7587_GENERIC_VI_RED _CID52_DB2020.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is: 9200
HDR block not accepted,error: 19
Elapsed: 9 secs.
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
PRELOADER SECURITY BYPASS ENABLED
CFG:111000000000
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35238402266381 CERT:N/A
FLASH CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
FLASH ID:897E
writing "G:\All Box stuff\Setool\Flash files\k770\CID 52\r8bc004\R8BC004_APP_SW_1201_7587_GENERIC_VI_RED _CID52_DB2020.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is: 9200
HDR block not accepted,error: 19
Elapsed: 14 secs.

[mohsin-*]

try again with fully charred battery and good cable if still same check in hardware

BR

[xerraco]

FLASH CID:49 COLOR:BROWN

Flash needed EROM & GDFS in SSW format in Empty Fill Tab. Then Full flash.

[iXNAYPAH]

try to fully charge your battery first
after that go to support area and download the CID 49 firmware
after you download the k770 cid 49 firmware
flash your phone via DCU-60 usb cable
go to setting tab and check sign mode and complete after flash
after the flash it

[Rhyan]

OTP: LOCKED:1 CID:51 PAF:1 IMEI:35238402266381 CERT:N/A
FLASH CID:49 COLOR:BROWN


Repeat The PROCESS..



Write Correct EROMS on your PHONE must be equal or higher than OTP..


Bro..

[medariy]

i think this cant upgrade cid, caus wrong gdfs when empty fill procedure..

[ponix]

the problem is in flash cid52 try to flash cid49

[maxie]

i check in support site but i can't find the CID 49 any body could share ?

http://img199.imageshack.us/img199/9630/snap106.jpg

[the_laser]

just properly finish reset operation, you only need to write EROM.
please check FAQ for details.

[sam3578]

your phone is in developer stage now write gdfs and erom...and do again flashing

[maxie]

just properly finish reset operation, you only need to write EROM.
please check FAQ for details.

if i reset again sir i spent another log ? because this is GDFS problem then after i recover then write gdfs then write erom then flash i get this problem ...

[xerraco]

if i reset again sir i spent another log ? because this is GDFS problem then after i recover then write gdfs then write erom then flash i get this problem ...

Beeter to make your ownthread & post Log.

[maxie]

@ xerraco

did you read this thread start from the first post ? if you've nothing to say dont reply...

http://support.setool.net/showthread.php?91-K770-HDR-block-not-accepted-error-19&p=701&viewfull=1#post701

[Rhyan]

if i reset again sir i spent another log ? because this is GDFS problem then after i recover then write gdfs then write erom then flash i get this problem ...


You WRITE WRONG EROM Mate thats why ERROR on FLASHING..


EROMS must be Equal or HIGHER than OTP..


Repeat the RESET PROCEDURE..


Bro..

[Amir-SkillZ]

i think this cant upgrade cid, caus wrong gdfs when empty fill procedure..

Upgrade CID 2 ways..
Recovery
Or using Script

[booma_sri]

change the setup use customize, unlock, and perform select the com port not usb