P990i auto on and whitescreen.

[i-Fixed]

This is not charging before, I removed diode v2675 but sad to say it becomes auto on then whitescreen. Now i try to replaced v2675 from other good unit, nothing changes. i also change n4070 for lcd lights display, still thesame:confused:. What is the possible damage parts?

[xerraco]

Try to Clean the board mate. check for short.

[i-Fixed]

Board is clean using thinner and 0% shorted detected bro.

[alfarouk]

read below post

[alfarouk]

PLEASE IGNORE "PRESS POWER ON" MESSAGES !!!!
detected MASTER on COM24, SLAVE on COM25
llbug: COM25 open error: "The system cannot find the file specified"
slave can't be inited
PDA setup failed
PM Elapsed: 103 secs.
CFG:000000000000
PLEASE IGNORE "PRESS POWER ON" MESSAGES !!!!
2/20/2010 12:46:52 PM detected MASTER on COM24, SLAVE on COM25
2/20/2010 12:46:52 PM PDA EROM VERSION: CXC162060 R1A10
2/20/2010 12:46:54 PM ChipID:7100,EMP protocol:0301
2/20/2010 12:46:55 PM
2/20/2010 12:46:55 PM PHONE STATE: "UNKNOWN" [00000000]
2/20/2010 12:46:55 PM SUPPORTED FLASH CID IS NOT DETECTED [0259]
2/20/2010 12:46:55 PM skipping empty loader...
2/20/2010 12:46:55 PM Can't load ID loader !
2/20/2010 12:46:56 PM Elapsed: 25 secs.
2/20/2010 12:49:12 PM CFG:000000000000
2/20/2010 12:49:12 PM writing "D:\Documents and Settings\Farouk\My Documents\Downloads\P990i_GW1__R9GA001_R5A01_R6E28 _R6E28.zip"
2/20/2010 12:49:12 PM Processing package
2/20/2010 12:49:12 PM D:\Documents and Settings\Farouk\My Documents\Downloads\P990i_GW1__R9GA001_R5A01_R6E28 _R6E28.zip
2/20/2010 12:49:12 PM
2/20/2010 12:49:34 PM detected MASTER on COM24, SLAVE on COM25
2/20/2010 12:49:34 PM PDA EROM VERSION: CXC162060 R1A10
2/20/2010 12:49:34 PM package not contains ISP files
2/20/2010 12:49:34 PM Processing ACPU files
2/20/2010 12:49:36 PM PROCESSING: Core OS
2/20/2010 12:49:57 PM FILE FLASHED OK
2/20/2010 12:49:57 PM PROCESSING: ROFS1
2/20/2010 12:51:51 PM FILE FLASHED OK
2/20/2010 12:51:51 PM PROCESSING: ROFS1 Extension
2/20/2010 12:53:28 PM FILE FLASHED OK
2/20/2010 12:53:28 PM PROCESSING: ROFS2
2/20/2010 12:54:02 PM FILE FLASHED OK
2/20/2010 12:54:02 PM PROCESSING: USERDATA
2/20/2010 12:59:02 PM FILE FLASHED OK
2/20/2010 12:59:02 PM PLEASE IGNORE "PRESS POWER ON" MESSAGES !!!!
2/20/2010 12:59:02 PM fetched MASTER on COM24, SLAVE on COM25
2/20/2010 12:59:04 PM ChipID:7100,EMP protocol:0301
2/20/2010 12:59:05 PM
2/20/2010 12:59:05 PM PHONE STATE: "UNKNOWN" [00000000]
2/20/2010 12:59:05 PM SUPPORTED FLASH CID IS NOT DETECTED [0259]
2/20/2010 12:59:05 PM skipping empty loader...
2/20/2010 12:59:05 PM FAILED TO SETUP PHONE


Pliz help
Thanks

[the_laser]

you can try to reset phone,though it will not help, if that is hardware problem

[alfarouk]

I dont know how but I put on the battery and identify and all is well now

any way thanks for your concern.

[shubhanshu]

http://support.setool.net/showthread.php?17-FAQ-from-MOBILE-FILES.COM&p=259&viewfull=1#post259

Regards