PDA

View Full Version : need help to solve w200 GDFS


arslan
02-07-2010, 06:38 AM
hi
dear team i have w200 with K700 model problem.
i recover this but in GDFS writeing not done here is log


CFG:100110000000
RESET MODE STARTED
ChipID:8040,EMP protocol:0301
NEW SECURITY (MARITA RESPIN) PHONE

PHONE STATE: "RETAIL"
FLASH CID: 0052
Speed:921600
RESET:070703 1100 NPACXC125870_DB2010_CERTRESETLOADER_P5F
FLASH ID:897E
Elapsed: 10 secs.



here is GDFS

CFG:100000000000
ChipID:8040,EMP protocol:0301
NEW SECURITY (MARITA RESPIN) PHONE

PHONE STATE: "RETAIL"
FLASH CID: 0052
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35735401864283 CERT:RED
LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
FLASH ID:897E
writing "D:\All BOX\Setool\Main\v0.915056\gdfs_in_ssw_format\w200_ gdfs_in_ssw_format.ssw"
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is: 32
HDR block not accepted,error: 02
Elapsed: 6 secs.
Amir-SkillZ
02-07-2010, 06:52 AM
Hello,

Model Showing as K700 is HW issue..
GDFS cannot Cure this ..

Br,
xerraco
02-07-2010, 07:11 AM
GDFS repair on DB2012 usually works on 5 Locks Closed.
yor21
02-07-2010, 07:20 AM
After RESET procedure, go to tab Empty fill and flash GDFS and Erom,
Finaly full flash !!
Amir-SkillZ
02-07-2010, 07:25 AM
is db2020 if model Shows as K700 is HW issue keep wasting credits on Reset Procedure..
same i Guess for Db2012...
gsmbac
02-07-2010, 02:35 PM
hi
dear team i have w200 with K700 model problem.
i recover this but in GDFS writeing not done here is log


CFG:100110000000
RESET MODE STARTED
ChipID:8040,EMP protocol:0301
NEW SECURITY (MARITA RESPIN) PHONE

PHONE STATE: "RETAIL"
FLASH CID: 0052
Speed:921600
RESET:070703 1100 NPACXC125870_DB2010_CERTRESETLOADER_P5F
FLASH ID:897E
Elapsed: 10 secs.



here is GDFS

CFG:100000000000
ChipID:8040,EMP protocol:0301
NEW SECURITY (MARITA RESPIN) PHONE

PHONE STATE: "RETAIL"
FLASH CID: 0052
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35735401864283 CERT:RED
LDR:061205 1354 HAN_DB2012_FLASHLOADER_R2B012_CXC1326738
FLASH ID:897E
writing "D:\All BOX\Setool\Main\v0.915056\gdfs_in_ssw_format\w200_ gdfs_in_ssw_format.ssw"
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is: 32
HDR block not accepted,error: 02
Elapsed: 6 secs.


1. your phone not reset successfully. try again.
2. after write gdfs still k700 then fully clean the board, change display.
regards.
the_laser
02-07-2010, 02:40 PM
@arslan:

please go to FAQ and correctly do reset procedure.