Mr Lazer. I need your attention.

[naveed70]

I want to unlock W580 (Which is Locked to Rogers) And i have logs but dont have TEST CARD with me.

Plz help how can i unlock this phone without TEST CARD . BY using CREDITS only.

And i have REST file in RAR format. in REST folder. But SETool Software cannot detect that REST FILE and ALso i cannot UNRAR that file. Showing Archive not available.

Log is here


v0.915057/UNI
CARD SERIAL: *********
Loaded 51 flash descriptors
CFG:000000000000
ChipID:9900,EMP protocol:0301
Speed:921600
FLASH ID:897E
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35297302685536 CERT:N/A
FLASH CID:52 COLOR:RED

Model (from GDFS):W580i
MAPP CXC article: R8BE001 prgCXC1123481_NAM_1_LA
MAPP CXC version: R8BE001
Language Package: ROGERS
CDA article: CDA102774/167
CDA version: R4A
Default article: cxc1123364
Default version: R8BE001
PROVIDER: 302-72
Network LOCKED

RESTORATION FILE NOT PRESENT
"R8BE001_CXC1123481_NAM_1_LA"
YOU MUST PERFORM FULL FLASHING
WHEN "ALTERNATIVE SECURITY BYPASS" ENABLED

BYPASS PACKAGE PRESENT FOR DETECTED FIRMWARE

Elapsed: 5 secs.


Plz i need your help. because i am new user of SETOOL. And i could,t find satisfactory answer also. As i dont have TEST CARD.

I need Solution to unlock WITH OUT TEST CARD.

[Amir-SkillZ]

Hello,

The Mean of Using Test card is To Get into Phone For normal Mode so that Executer Can RUN..
U can Use Original SIM card of Phone (on which its Originally Locked) and DO same as Normal UNlock..
As Rest File u Dont have...Make Flash to Phone ANy Other Version from Support...If rest Exist Proceed Else Make Rest File..
How to ,
Load main FIle and FS in Flash TAB
Press Identify Software will Auto make Rest File
And u r Ready To UNlock..

Br,

[.::CARLO::.]

RESTORATION FILE NOT PRESENT
"R8BE001_CXC1123481_NAM_1_LA"

[naveed70]

Hello,

The Mean of Using Test card is To Get into Phone For normal Mode so that Executer Can RUN..
U can Use Original SIM card of Phone (on which its Originally Locked) and DO same as Normal UNlock..
As Rest File u Dont have...Make Flash to Phone ANy Other Version from Support...If rest Exist Proceed Else Make Rest File..
How to ,
Load main FIle and FS in Flash TAB
Press Identify Software will Auto make Rest File
And u r Ready To UNlock..

Br,

I tried now two times always asking TEST CARD and Original Simcard. Plz i dont have original Simcard. Because phone is Locked to Roger and i am in Srilanka. So what shall i do here is log


v0.915057/UNI
CARD SERIAL: 00132258
Loaded 51 flash descriptors
CFG:000000000000
ChipID:9900,EMP protocol:0301
Speed:921600
FLASH ID:897E
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35297302685536 CERT:N/A
FLASH CID:52 COLOR:RED

Model (from GDFS):W580i
MAPP CXC article: R8BE001 prgCXC1123481_NAM_1_LA
MAPP CXC version: R8BE001
Language Package: ROGERS
CDA article: CDA102774/167
CDA version: R4A
Default article: cxc1123364
Default version: R8BE001
PROVIDER: 302-72
Network LOCKED

RESTORATION FILE NOT PRESENT
"R8BE001_CXC1123481_NAM_1_LA"
YOU MUST PERFORM FULL FLASHING
WHEN "ALTERNATIVE SECURITY BYPASS" ENABLED

BYPASS PACKAGE PRESENT FOR DETECTED FIRMWARE

Elapsed: 3 secs.
CFG:000000000000
ChipID:9900,EMP protocol:0301
Speed:921600
FLASH ID:897E
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35297302685536 CERT:N/A
FLASH CID:52 COLOR:RED

Model (from GDFS):W580i
MAPP CXC article: R8BE001 prgCXC1123481_NAM_1_LA
MAPP CXC version: R8BE001
Language Package: ROGERS
CDA article: CDA102774/167
CDA version: R4A
Default article: cxc1123364
Default version: R8BE001
PROVIDER: 302-72
Network LOCKED

SEARCH:C:\Program Files\SETOOL2G\W580_R8BE001_MAIN_NAM_1_LA_RED52.mb n
"R8BE001_CXC1123481_NAM_1_LA" CREATED
BYPASS PACKAGE PRESENT FOR DETECTED FIRMWARE

Elapsed: 7 secs.
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110001000000
ChipID:9900,EMP protocol:0301
Speed:921600
FLASH ID:897E
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35297302685536 CERT:N/A
FLASH CID:52 COLOR:RED

Model (from GDFS):W580i
MAPP CXC article: R8BE001 prgCXC1123481_NAM_1_LA
MAPP CXC version: R8BE001
Language Package: ROGERS
CDA article: CDA102774/167
CDA version: R4A
Default article: cxc1123364
Default version: R8BE001
PROVIDER: 302-72
Network LOCKED

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

BYPASS PACKAGE PRESENT FOR DETECTED FIRMWARE

Elapsed: 3 secs.
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110001000000
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35297302685536 CERT:N/A
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
FLASH ID:897E
LDR:070904 1245 AN2CXC1250562_DB2020_CSLOADER_R3A013
loader startup: executed
loader GDFS startup: executed
loader filesystem startup: executed
loader unlock: executed

INSERT SIM CARD, FULLY TURN PHONE ON
GO TO GAMES MENU AND RUN EXECUTOR
AFTER PHONE TURNS OFF OR HANGS
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
FINALLY PRESS "READY"

ChipID:9900,EMP protocol:0301
Speed:921600
Starting embedded bootloader...
PROCEDURE WAS STOPPED BY USER
embedded flashloader not responds !
Elapsed: 177 secs.
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110001000000
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35297302685536 CERT:N/A
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
FLASH ID:897E
LDR:070904 1245 AN2CXC1250562_DB2020_CSLOADER_R3A013
loader startup: executed
loader GDFS startup: executed
loader filesystem startup: executed
loader unlock: executed

INSERT SIM CARD, FULLY TURN PHONE ON
GO TO GAMES MENU AND RUN EXECUTOR
AFTER PHONE TURNS OFF OR HANGS
REMOVE BATTERY FROM PHONE, THEN INSERT IT BACK
FINALLY PRESS "READY"



Br

Naveed Yousaf

[Amir-SkillZ]

Hello,

There is No Other way Except test Card or Original SIM Card..
Rest is Perform Full Unlock Checking Signed Mode + Perform Full Unlock Instead oF UserCode
But Thats Server Dependable If CSCA Server is ON...
Try Your Luck..
One more thing..
Try Older Setool version GUI 38 or previous (not sure)
To perform Flash Patch Unlock Option Check News Thread ....Older Pages

[naveed70]

i tried with older version for patch unlocking. now phone is cannot on. here is the log


v0.914020/UNI
CARD SERIAL: 00132258
Loaded 51 flash descriptors
SERVER SUPPORT ENABLED.
Abort all operations.
Abort all operations.
No server found.
CARD COUNTERS: FLASH 10, UNLOCK 10
Elapsed:22 secs.
SERVER SUPPORT ENABLED.
No server found.
CARD COUNTERS: FLASH 10, UNLOCK 10
Elapsed:22 secs.
SERVER SUPPORT ENABLED.
No server found.
CARD COUNTERS: FLASH 10, UNLOCK 10
Elapsed:22 secs.
SERVER SUPPORT ENABLED.
No server found.
CARD COUNTERS: FLASH 10, UNLOCK 10
Elapsed:22 secs.
SERVER SUPPORT ENABLED.
ALTERNATIVE SECURITY BYPASS ENABLED.
Open COM port OK
unknown ChipID (613), RETRY
Can't load ID loader !
Elapsed:8 secs.
SERVER SUPPORT ENABLED.
ALTERNATIVE SECURITY BYPASS ENABLED.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35297302685536 CERT:N/A
FLASH CID:52 COLOR:RED

Model:W580i
MAPP CXC article: R8BE001 prgCXC1123481_NAM_1_LA
MAPP CXC version: R8BE001
Language Package:ROGERS
CDA article: CDA102774/167
CDA version: R4A
Default article: cxc1123364
Default version: R8BE001

Network LOCKED
Operator: 302-72

RESTORATION FILE NOT PRESENT
"R8BE001_CXC1123481_NAM_1_LA"
YOU MUST PERFORM FULL FLASHING FOR PATCH UNLOCK

Elapsed:23 secs.
SERVER SUPPORT ENABLED.
ALTERNATIVE SECURITY BYPASS ENABLED.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP LOCKED:1 CID:51 PAF:1 IMEI:35297302685536 CERT:N/A
FLASH CID:52 COLOR:RED

Model:W580i
MAPP CXC article: R8BE001 prgCXC1123481_NAM_1_LA
MAPP CXC version: R8BE001
Language Package:ROGERS
CDA article: CDA102774/167
CDA version: R4A
Default article: cxc1123364
Default version: R8BE001

Network LOCKED
Operator: 302-72

RESTORATION FILE NOT PRESENT
"R8BE001_CXC1123481_NAM_1_LA"
YOU MUST PERFORM FULL FLASHING FOR PATCH UNLOCK

Elapsed:3 secs.
SERVER SUPPORT ENABLED.
ALTERNATIVE SECURITY BYPASS ENABLED.
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP LOCKED:1 CID:51 PAF:1 IMEI:35297302685536 CERT:N/A
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok

CID52 BYPASS PROCEDURE STARTED
Processing part1...
Processing part2...
Processing part3....
Open COM port OK
OTP LOCKED:1 CID:51 PAF:1 IMEI:35297302685536 CERT:N/A
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:061201 1314 HANCXC1329129_DB2020_FLASHLOADER_R2A005
Flash ID check:897E
Flash props sent ok
Send subblock NAK
CID52 BYPASS PROCEDURE FINISHED

Elapsed:309 secs.



i dont know what i do. i checked in setting use server for csa unlock. and enable alternative security bypass. and complete phone after flash.

but now my phone is dead.

plz tell me i simple way how can i bring back phone alive. and i dont have any backup also


thanks


br

Naveed Yousaf

[naveed70]

here is log after phone dead.


v0.915057/UNI
CARD SERIAL: 00132258
Loaded 51 flash descriptors
CFG:000000000000
ChipID:9900,EMP protocol:0301
Speed:921600
FLASH ID:897E
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35297302685536 CERT:N/A
FLASH CID:52 COLOR:RED
can't get packet start.
no ack during gdfs_readvar !
SCRC READ FAILURE
Elapsed: 33 secs.
CFG:000000000000
ChipID:9900,EMP protocol:0301
Speed:921600
FLASH ID:897E
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35297302685536 CERT:N/A
FLASH CID:52 COLOR:RED
no ack during gdfs_readvar !
SCRC READ FAILURE
Elapsed: 3 secs.
CFG:000000000000
ChipID:9900,EMP protocol:0301
Speed:921600
FLASH ID:897E
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35297302685536 CERT:N/A
FLASH CID:52 COLOR:RED




plz i need your help to make phone alive again.


Br

Naveed Yousaf

[.::Skylinks::.]

v0.914020/UNI Does,t Support Flash Patching..

v0.914028/UNI Flash Patching Starts From This Version..

Now you have messed up GDFS , Read FAQ about that problem...!

[Sweden-GSM]

simply chose any generic flash file (use latest better) and corresponding FS file e.g any with english can use euro1,2,3,4,5 doestn matter

mark
signed mode
and
customize after flash

press FLASH
your phone will be alive again ;)

[Renzox]

First flash phone with a generic firmware ( you can download it from support ), once you have phone working and have bypass package and rest file present , tick this after write down user and pass of a log acccount :

- signed mode
- use alternative bypass

and press unlock.


Regards

[naveed70]

here is log after as you said i did.

SERVER CREDITS LEFT/USED: 25/5
CARD COUNTERS: FLASH 10, UNLOCK 10
Elapsed: 2 secs.
SIGNED MODE (USING SERVER)
CFG:100100000000
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35297302685536 CERT:N/A
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
FLASH ID:897E
writing "C:\Program Files\SETOOL2G\W580_R8BE001_MAIN_GENERIC_LA_RED52. mbn"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is: 9200
Will flash 460 blocks...
subblock 01A NAK, [442F0000/00010000]
Elapsed: 52 secs.


plz guide me what shall i do now.

[naveed70]

plz sir help me i need help regarding this.


SIGNED MODE (USING SERVER)
CFG:100100000000
ChipID:9900,EMP protocol:0301
Speed:921600
FLASH ID:897E
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35297302685536 CERT:N/A
FLASH CID:52 COLOR:RED

Model (from GDFS):W580i
MAPP CXC article: R8BE001 prgCXC1123481_NAM_1_LA
MAPP CXC version: R8BE001
Language Package: ROGERS
CDA article: CDA102774/167
CDA version: R4A
Default article: cxc1123364
Default version: R8BE001
PROVIDER: 302-72
Network LOCKED

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

BYPASS PACKAGE PRESENT FOR DETECTED FIRMWARE

Elapsed: 3 secs.
SIGNED MODE (USING SERVER)
CFG:100100000000
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35297302685536 CERT:N/A
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
FLASH ID:897E
writing "C:\Program Files\SETOOL2G\R8BE001_1123362_GENERIC_LA.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is: 9200
Will flash 460 blocks...
subblock 000 NAK, [446E0000/00010000]


what i do now.

plz plz


Br

Naveed Yousaf

[naveed70]

plz plz somebody help me. i think there is error in GDFS because i tried older version of setool to patch unlock.

plz help me i dont know how to restore phone. plz tell me what i do . i dont mind to use credit to use (Logs) but i want to phone back alive.

Thanks

Br

Naveed yousaf

[naveed70]

and also i tried in USB here is log..


v0.915057/UNI
CARD SERIAL: 00132258
Loaded 51 flash descriptors
CFG:000000000000
ChipID:9900,EMP protocol:0301

PHONE STATE: "RETAIL"
FLASH CID: 0052
Speed:921600
FLASH ID:897E
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35297302685536 CERT:RED
FLASH CID:52 COLOR:RED

Model (from GDFS):W580i
MAPP CXC article: R8BE001 prgCXC1123481_NAM_1_LA
MAPP CXC version: R8BE001
Language Package: ROGERS
CDA article: CDA102774/167
CDA version: R4A
Default article: cxc1123364
Default version: R8BE001
PROVIDER: 302-72
Network LOCKED

RESTORATION FILE PRESENT FOR DETECTED FIRMWARE

BYPASS PACKAGE PRESENT FOR DETECTED FIRMWARE

SECURITY UNITS BACKUP CREATED.
Elapsed: 19 secs.
SIGNED MODE (USING SERVER)
CFG:100100000000
ChipID:9900,EMP protocol:0301

PHONE STATE: "RETAIL"
FLASH CID: 0052
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35297302685536 CERT:RED
FLASH CID:52 COLOR:RED
PATCH:061205 1523 HANCXC9876543210_DB2020_MEM_PATCHER_R2A006 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
FLASH ID:897E
writing "C:\Program Files\SETOOL2G\R8BE001_1123362_GENERIC_LA.ssw"
CURRENT FLASH FILE CID:52
SSW uses full hash, hash len is: 9200
Will flash 460 blocks...
llbug: blk write fail. fatal

[xerraco]

v0.914020/UNI Does,t Support Flash Patching..

v0.914028/UNI Flash Patching Starts From This Version..

Now you have messed up GDFS , Read FAQ about that problem...!Starting from v0.914013/UNI was Supported Mare up to v0.914028/UNI.

[Sweden-GSM]

plz sir help me i need help regarding this.



what i do now.

plz plz


Br

Naveed Yousaf


subblock 000 NAK, [446E0000/00010000]

make sure your battery is fully charged ;)

then flash as i said

signed mode
and
customize after flash

[chamisrilanka]

dir naveed70. get 6 in 1 super sim card and http://www.downloadatoz.com/utility_directory/magicsim/ download this software, and write this value to sim card using sim card reder.

name: Test Card

ICCID: 00000000000000000000

IMSI: 080910101234567890

KI: E109649209F8E120421E6825C62BA01D

SMSP: 777
im also from srilanka ampara. i think this helpfull u.

[chamisrilanka]

naveen70 do u want make test card? and ur phone des answer is flash phone with chaina same firmware and fs file. im also from srilanka ampara.