View Full Version : W850 CID53 white lcd blink!
There is log:
CFG:000000000000
ChipID:9900,EMP protocol:0301
PHONE STATE: "RETAIL"
FLASH CID: 0053
Speed:115200
FLASH ID:897E
OTP: LOCKED:1 CID:49 PAF:1 IMEI:352........359 CERT:RED
FLASH CID:53 COLOR:RED
IMEI MISMATCH ! GDFS IMEI:352........701
Model (from GDFS):W850i
Brand:Generic
MAPP CXC article: R1KG001 prgCXC1250200_GENERIC_CY
MAPP CXC version: R1KG001
Language Package: EUROPE_1
CDA article: CDA102295/7
CDA version: R2A
Default article: cxc1250489
Default version: R1ED001
PROVIDER: 000-00
SIMLOCKS NOT DETECTED
RESTORATION FILE PRESENT FOR DETECTED FIRMWARE
BYPASS PACKAGE PRESENT FOR DETECTED FIRMWARE
SECURITY UNITS BACKUP CREATED.
Elapsed: 7 secs.
Imei mismatch....how is this need??:confused:
SE MAN
02-17-2010, 09:26 AM
IMEI mismatch need reset procedure ...........
Read FAQ for detail
xerraco
02-17-2010, 09:47 AM
If you dont have the Backup then TP repair or Reset is the Solution.
Search FAQ:Reset procedure....Imei mismatch etc!....Sorry - no matches. Please try some different terms
1. go to emptyboard tab
2. select proper model
3. on settings, check "signed mode"
4. press recovery
5. after successful recovery
6. on settings uncheck all
7. if gdfs totally damaged, add to firmware area proper gdfs in ssw format,otherwise skip that step
8. add to firmware area proper EROM (EROM CID >= OTP CID)
9. press flash
10. if needed,reflash phone on usual semc tab with needed settings.
Would this be the solution?
SE MAN
02-18-2010, 07:04 AM
Search FAQ:Reset procedure....Imei mismatch etc!....Sorry - no matches. Please try some different terms
Ok
http://support.setool.net/showthread.php?11-HOW-TO-WORK-WITH-A1-BASED-PHONES&p=328&viewfull=1#post328
;)
Recovery..........not power on!
gdfs and erom flash /usb,com/
CFG:000000000000
ChipID:9900,EMP protocol:0301
Speed:115200
OTP: LOCKED:1 CID:49 PAF:1 IMEI:352.........359 CERT:N/A
FLASH CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
FLASH ID:897E
writing "C:\Program Files\SeTool2\gdfs_in_bin_format\W850_GDFS_SSW.ssw"
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is: 32
HDR block not accepted,error: 19
Elapsed: 19 secs.
CFG:000000000000
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:115200
OTP: LOCKED:1 CID:49 PAF:1 IMEI:352........359 CERT:N/A
FLASH CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
FLASH ID:897E
writing "C:\Program Files\SeTool2\gdfs_in_bin_format\W850_GDFS_SSW.ssw"
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is: 32
HDR block not accepted,error: 19
Elapsed: 6 secs.
How longer?
dejanp
02-18-2010, 09:40 AM
check settings, signed mode is cecked or not?
Sorry...no good the gdfs file!
writing "C:\Program Files\SeTool2\gdfs_in_ssw_format\w850_gdfs_in_ssw_ format_CID49_BROWN.ssw"
CFG:000000000000
ChipID:9900,EMP protocol:0301
BOOTROM MODE DETECTED
Speed:115200
OTP: LOCKED:1 CID:49 PAF:1 IMEI:35240101133359 CERT:N/A
FLASH CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
FLASH ID:897E
writing "C:\Program Files\SeTool2\gdfs_in_ssw_format\w850_gdfs_in_ssw_ format_CID49_BROWN.ssw"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 640
Will flash 32 blocks...
writing "C:\Program Files\SeTool2\eroms\db2020\DB2020EROM_CNV_RED53_BR OWN_CID49_DB2020.ssw"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 40
Will flash 2 blocks...
Elapsed: 33 secs.
Phone lcd white blink......identify log:
CFG:000000000000
ChipID:9900,EMP protocol:0301
PHONE STATE: "RETAIL"
FLASH CID: 0053
Speed:115200
FLASH ID:897E
OTP: LOCKED:1 CID:49 PAF:1 IMEI:35240101133359 CERT:RED
FLASH CID:53 COLOR:RED
IMEI MISMATCH ! GDFS IMEI:35240101254794
Model (from GDFS):K700
MAPP CXC article: R1KG001 prgCXC1250200_GENERIC_CY
MAPP CXC version: R1KG001
Language Package: EUROPE_4
CDA article: CDA102568/13
CDA version: R2A
Default article: cxc1250489
Default version: R1ED001
PROVIDER: 000-00
SIMLOCKS NOT DETECTED
RESTORATION FILE PRESENT FOR DETECTED FIRMWARE
BYPASS PACKAGE PRESENT FOR DETECTED FIRMWARE
SECURITY UNITS BACKUP CREATED.
Elapsed: 7 secs.
Imei mismatch!!
What I do badly?????
SE MAN
02-18-2010, 09:43 AM
check setting in sign mode and try again.
the_laser
02-18-2010, 10:34 AM
http://support.setool.net/showthread.php?267-W850-CID53-white-lcd-blink%21&p=2042&viewfull=1#post2042
step by step.
CID 50,51,52,53
that is so-called reset procedure.
1. go to emptyboard tab
2. select proper model
3. on settings, check "signed mode"
4. press recovery
5. after succeful recovery
6. on settings uncheck all
7. if gdfs totally damaged, add to firmware area proper gdfs in ssw format,otherwise skip that step
8. add to firmware area proper EROM (EROM CID >= OTP CID)
9. press flash
10. if needed,reflash phone on usual semc tab with needed settings.
I did it based on this!
After recovery UNCHECK ALL SETTINGS!
Gdfs and erom file okay?
After gdfs and erom flash,reflash main and fs...settings signed mode+customize phone.
I did it so.
the_laser
02-19-2010, 09:13 AM
nope. you wrote erom+gdfs on usual semc tab, while nobody told you to switch away from emptyboard tab until p.10
also, that is useless thing - white-blink is hardware problem.
billycomm
02-19-2010, 12:24 PM
the hardware and software problem
1 change the front keyboard
2 change the flex
3 probably use change the screen
4 then flash it again
it should work.
nope. you wrote erom+gdfs on usual semc tab, while nobody told you to switch away from emptyboard tab until p.10
also, that is useless thing - white-blink is hardware problem.
Oké....emptyboard tab flash erom+gdfs.
After flash identify log:
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110000000000
ChipID:9900,EMP protocol:0301
PHONE STATE: "RETAIL"
FLASH CID: 0053
Speed:115200
FLASH ID:897E
OTP: LOCKED:1 CID:49 PAF:1 IMEI:35240101133359 CERT:RED
FLASH CID:53 COLOR:RED
Model (from GDFS):K700
MAPP CXC article: R1KG001 prgCXC1250200_GENERIC_CY
MAPP CXC version: R1KG001
Language Package: EUROPE_4
CDA article: CDA102568/13
CDA version: R2A
Default article: cxc1250489
Default version: R1ED001
PROVIDER: 000-00
SIMLOCKS NOT DETECTED
RESTORATION FILE PRESENT FOR DETECTED FIRMWARE
BYPASS PACKAGE PRESENT FOR DETECTED FIRMWARE
SECURITY UNITS BACKUP CREATED.
Elapsed: 8 secs.
Imei oké....but GDFS K700!!:confused:
flash main+fs......problem not solved.
PHONE STATE: "RETAIL"
FLASH CID: 0053
Speed:115200
OTP: LOCKED:1 CID:49 PAF:1 IMEI:35240101133359 CERT:RED
FLASH CID:53 COLOR:RED
PATCH:071120 1355 HANCXC9876543210_DB2020_MEM_PATCHER_R2A012 0
LDR:080108 1810 ESGCXC1329129_DB2020_FLASHLOADER_R2A015
FLASH ID:897E
writing "C:\Documents and Settings\-\Dokumentumok\W850cid53\R1KG001_1250200_GENERIC_CY .ssw"
CURRENT FLASH FILE CID:53
SSW uses full hash, hash len is: 9200
Will flash 460 blocks...
writing "C:\Documents and Settings\-\Dokumentumok\W850cid53\R1KG001_FS_CENT_EUROPE_CY_ RED_CID53.software"
CURRENT FLASH FILE CID:53
SSW uses full hash, hash len is: 4740
Will flash 237 blocks...
LDR:070904 1245 AN2CXC1250562_DB2020_CSLOADER_R3A013
loader startup: executed
loader GDFS startup: executed
loader filesystem startup: executed
loader unlock: executed
using GENERIC phone customization
tpa/preset/custom/C3_PCA_G3v2.cer
tpa/preset/custom/CONTENT_DOWNLOAD_HOOK_2.itm
tpa/preset/custom/customize.xml
tpa/preset/custom/DESKTOP_HOOK_2.itm
tpa/preset/custom/Entrust.net Root Certificate.cer
tpa/preset/custom/Entrust.net_WTLS_Root_Certificate.wcrt
tpa/preset/custom/FM_PICTURES_HOOK_3.itm
tpa/preset/custom/FM_SOUNDS_HOOK_3.itm
tpa/preset/custom/FM_THEMES_HOOK_3.itm
tpa/preset/custom/FM_VIDEOS_HOOK_3.itm
tpa/preset/custom/GAMES_HOOK_3.itm
tpa/preset/custom/GTE_CyberTrust_Root.cer
tpa/preset/custom/GTE_Cybe_Trust_Root_WTLS.wcrt
tpa/preset/custom/Root.cer
tpa/preset/custom/SEMC_E2E_Root_CA.crt
tpa/preset/custom/SETT_RINGTONE_HOOK_3.itm
tpa/preset/custom/ThawtePremium.der
tpa/preset/custom/ThawteServerCA.cer
tpa/preset/custom/Utiroot.cer
tpa/preset/custom/VeriSignClass3Root.cer
tpa/preset/custom/Verisign_Class_3_CA_WTLS.wcrt
Phone detached
Elapsed: 427 secs.
CFG:000000000000
ChipID:9900,EMP protocol:0301
Hardwer will be...
I do not understand it only that the gdfs for what K700? :)))
the_laser
02-21-2010, 12:59 PM
http://support.setool.net/showthread.php?267-W850-CID53-white-lcd-blink!&p=2260&viewfull=1#post2260
second line.
iqballk
02-21-2010, 05:12 PM
@uu2..
* select w850
* mark only SIGN MODE ( Cost 1 credit nd u hve 2 enter user name nd pass)
* press RECOVERY
* connect phone with usb or com port
* you get brown 49 w850 after successful RECOVERY
* switch to empty board tab
* select w850
* add w850_gdfs_ssw.ssw
* add DB2020EROM_CNV_RED52_BROWN_CID49_DB2020.ssw
* click flash
* now u get red 52 w850
* flash with red 52 firmware
* DONE.
@uu2..
* select w850
* mark only SIGN MODE ( Cost 1 credit nd u hve 2 enter user name nd pass)
* press RECOVERY
* connect phone with usb or com port
* you get brown 49 w850 after successful RECOVERY
* switch to empty board tab
* select w850
* add w850_gdfs_ssw.ssw
* add DB2020EROM_CNV_RED52_BROWN_CID49_DB2020.ssw
* click flash
* now u get red 52 w850
* flash with red 52 firmware
* DONE.
Thnx......I did it so only other flash file.Anyway hw wrong the machine!
Yet a question......why I was banning onto a month??????
SE MAN
03-25-2010, 08:27 PM
Just Read This And You Will Know
http://support.setool.net/showthread.php?225-Very-important-Read-before-Post-%28Too-All-Members%29