W850 5 locks closed !

[Faheem Anjum]

after repair GDFS 5 locks closed how what i do anyone have good replay

i repair the GDFS with TP can i repair 5 locks with TP ?

[Max_B]

TP is over, not supported no more !

Use reset station, check faq for more infos.

BR
Max_B

[Faheem Anjum]

thanks for repair can You gave me the link ??

[Max_B]

Sure

http://support.setool.net/showthread.php?11-HOW-TO-WORK-WITH-A1-BASED-PHONES

that is so-called reset procedure.

1. go to emptyboard tab
2. select proper model
3. on settings, check "signed mode"
4. press recovery
5. after succeful recovery
6. on settings uncheck all
7. if gdfs totally damaged, add to firmware area proper gdfs in ssw format,otherwise skip that step
8. add to firmware area proper EROM (EROM CID >= OTP CID)
9. press flash
10. if needed,reflash phone on usual semc tab with needed settings.

BR
Max_B

[Faheem Anjum]

RUNNING v0.915060/UNI
CARD SERIAL 00066028
USBFLASH DRIVER VERSION 02.02.00.05
Found 2 FTDI device(s).
UFS #78039 READY
CFG:000000000000
RECOVERY MODE STARTED
ChipID:9900,EMP protocol:0301
Speed:921600
REC:070703 1229 NPA4_CXC1329130_DB2020_SEMC_RECOVERY_P3N
can't open file "frec\marikabrowncid16.bin"
Recovery failed. Phone dead.
Elapsed: 43 secs.
SIGNED MODE (USING SERVER)
CFG:100000000000
RESET MODE STARTED
ChipID:9900,EMP protocol:0301
Speed:921600
RESET:070703 1106 NPACXC1250329_DB2020_CERTRESETLOADER_P3AA
FLASH ID:2019
server step1 error:No server found.
Elapsed: 4 secs.
SIGNED MODE (USING SERVER)
CFG:100000000000
SERVER CREDITS LEFT/USED: 3/27
CARD COUNTERS: FLASH 116, UNLOCK 119
Elapsed: 3 secs.
SIGNED MODE (USING SERVER)
CFG:100000000000
RESET MODE STARTED
ChipID:9900,EMP protocol:0301
Speed:921600
RESET:070703 1106 NPACXC1250329_DB2020_CERTRESETLOADER_P3AA
FLASH ID:2019
GOT SEED:8BF184E92180916015D0FF09
P96 AUTH PASSED
OTP: LOCKED:1 CID:49 PAF:1 IMEI:35240101040957 CERT:N/A
PHONE SUCCESSFULLY RESET TO DEVELOPER STATE
Elapsed: 7 secs.
CFG:000000000000
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:49 PAF:1 IMEI:35240101040957 CERT:N/A
FLASH CID:49 COLOR:BROWN
LDR:060721 1021 DB2020_SERVICE_LOADER
FLASH ID:2019
writing "F:\SETOOL\eroms\db2020\DB2020EROM_CNV_RED52_BROWN_ CID49_DB2020.ssw"
CURRENT FLASH FILE CID:49
SSW uses full hash, hash len is: 40
Will flash 2 blocks...
Setting up GDFS...
OTP WRITE NOT EXECUTED
WRITING CLEAR SIMLOCK UNITS...
ALL UNLOCK/LOCK CODES SET TO "85283254"
SIGNING...
Elapsed: 16 secs.



thanks Done

[Max_B]

Bravo !

BR
Max_B

[dedeyk]

i have 1 question,can i use this method with new flash ic with cid49 but no credit? i have k800 cid 52 with have 5 locks.i replaced new ic with empty procedure but 5 locks network not gone

[dedeyk]

i have 1 question,can i use this method with new flash ic with cid49 but no credit? i have k800 cid 52 with have 5 locks.i replaced new ic with empty procedure but 5 locks network not gone

[dedeyk]

sorry double post

[.::: dawah telecom :::.]

i have 1 question,can i use this method with new flash ic with cid49 but no credit? i have k800 cid 52 with have 5 locks.i replaced new ic with empty procedure but 5 locks network not gone

make new thread about your question m8...

[xerraco]

Better makr New Thread, not hijack someones thread.