W508 Dead

[tito millo]

Hi i got a W508 with hanging problem so i managed to flash phone, At 1st time i tried to flash i got an error when FS flashing, now phone is dead and cant repair it, i have unlocked using singed mode and nothing phone still with same problem at FS flashing.
Please help me to resolve this my customer is in hurry.
Heres my log:


v0.915057/UNI
CARD SERIAL: 000XXXXX
Loaded 51 flash descriptors
SIGNED MODE (USING SERVER)
CFG:100100000000
ChipID:D900,EMP protocol:0401

PHONE STATE: "RETAIL"
FLASH CID: 0053
OTP LOCKED:1 CID:53 PAF:1 IMEI:35395703406409 CERT:RED
LDR:2009-07-31 10:42 1207-6250_DB3200_CS_LOADER_ACC_SDRAM_R2A084
LDR CAPS:SYSTEM FLASH SIGNATURE AUTH
LDR:2009-07-31 10:44 1207-6251_DB3200_CS_LOADER_APP_SDRAM_R2A084
LDR CAPS:SYSTEM FLASH GDFS FILESYSTEM TA
writing "C:\Documents and Settings\Tito Millo\Escritorio\BackUp\Desktop\Tools\SEtool updates\v0.915056\SETool flash file\W508\R1FA035_APP_SW_1216_7630_GENERIC_BR_REDB ROWNBLUE_CID53_52_49_DB3200.software"
ALLOWED DOMAINS:BLUE BROWN RED
MAXIMUM CID:53
Will flash 795 blocks...
ssw file accepted
writing "C:\Documents and Settings\Tito Millo\Escritorio\BackUp\Desktop\Tools\SEtool updates\v0.915056\SETool flash file\W508\R1FA035_FS_WESTERN_EUROPE_BR_REDBROWNBLU E_CID53_52_49.software"
ALLOWED DOMAINS:BLUE BROWN RED
MAXIMUM CID:53
Will flash 1314 blocks...
flash address (86570000) not accepted,error:2B
Elapsed: 283 secs.

Br,
Tito Millo

[the_laser]

phone flash ic bad, best thing you can do - try different firmware version or different ecc modes.

[luzer]

Also try to slowdown the flashing speed after leaving the phone without battery for a while

[tito millo]

phone flash ic bad, best thing you can do - try different firmware version or different ecc modes.

Hi, no luck same problem when flashing FS, tried diferent flash files and with all ECC modes and still the same problem, is there any other solution???
I have also tried with al baudrates and no luck

Br,
Tito Millo

[dimetri]

change the ic flash for solve dear.do not more trying with software.

[chatfan]

flash it with another FW

[Gabiunlock]

i tryed all firmwares and keep problem please the laser any solution..

[vincent86jun]

unlucky...i'm oso got this problerm..somebody can tell me after change flash ic,need do gdfs and erom for this phone??

[the_laser]

yes.

[kenjiyan9128]

juz use the SEUS to update ur W508i... maybe can solve ur problem... if u got same problem like this (j105i w508i t707i) u should try SEUS be4 u chg flash ic....GL dude...

[the_laser]

it will not solve problem.

[M-taheri]

it will not solve problem.

I solved this problem with SEUS. (in t707 and w508).
when I flash It with setool this error occur :
flash address (86570000) not accepted,error:2B
but I flashed them with SEUS whitout errors.
did you try it your self?

[the_laser]

if you can not understand, i will explain slowly:

nand flash is build by sectors, sectors divide by pages.
when phone flashed, next scenario occurs:
sector erased, all pages in sector filled with new data, data verified, next sectors processed and that is repeated until entire flash file ends.
error: 2b is error while erasing sector - flash file area lies on bad sector location.

you can use any tool, but bad sector will always be bad sector.
the only solution will be using different firmware, which not overlaps with bad sectors.