KU580 NEED HELP

[mike67]

Hello Laser and the rest of the setool team

Firstly congrats on the new forum ..

I recievd this KU580 in the hanging state ,,, i read the info and it was reading alrite i believe but than i flashed it with ROM repair file BIN-KU580W-V10a-OCT-15-2007-OPEN-NLD.cry

It finished but with error ,,, than i reflashed it with 3 different files
cxc000000_U300_PHONE_MCP_NAND_B26.ssw
KU580_FS_Img_ES.ssw
KU580_FS_LGPXO_Img.ssw

Here is the log and i also saw its telling me phone CID54 not supported now ,,, wwhat have i done wrong and how can i revive this phone if not totally alive atleast partially alive in hanging state ,,


v0.915057/UNI
CARD SERIAL: 00014178
Loaded 51 flash descriptors
SIGNED MODE (USING SERVER)
ALTERNATIVE SECURITY BYPASS ENABLED
CFG:110000000000
PROCEDURE WAS STOPPED BY USER
Can't load ID loader !
Elapsed: 4 secs.
CFG:000000000000
ChipID:C802,EMP protocol:0401
BOOTROM MODE DETECTED
OTP DBG: [1,54,0,35473801095967]
OTP LOCKED:1 CID:54 PAF:0 IMEI:35473801095967 CERT:BROWN
not supported at the moment
Elapsed: 2 secs.
SIGNED MODE (USING SERVER)
CFG:100100000000
ChipID:C802,EMP protocol:0401
BOOTROM MODE DETECTED
OTP DBG: [1,54,0,35473801095967]
OTP LOCKED:1 CID:54 PAF:0 IMEI:35473801095967 CERT:BROWN
LDR:070413 1407 HYDCXC1721610_A2_DB31XX_PRODUCTION_LOADER_ACC_SDRA M_P3E
LDR CAPS:SYSTEM SIGNATURE
LDR:070609 0828 HYDCXC1721611_1A2_DB31XX_PRODUCTION_LOADER_APP_SDR AM_NAND_P3F
LDR CAPS:SYSTEM FLASH GDFS FILESYSTEM
writing "C:\Documents and Settings\AKBER NATHOO\Desktop\KU580\cxc000000_U300_PHONE_MCP_NAND _B26.ssw"
ALLOWED DOMAINS:BLUE BROWN RED
MAXIMUM CID:54
Will flash 383 blocks...
ssw file accepted
writing "C:\Documents and Settings\AKBER NATHOO\Desktop\KU580\KU580_FS_Img_ES.ssw"
ALLOWED DOMAINS:BLUE BROWN
MAXIMUM CID:54
Will flash 1174 blocks...
[a2_fout_ssw] can't get NET header
Elapsed: 430 secs.

please help me out here

thanks
mike

[arash]

use a fully charged battery and repeat the flashing procedure
(note, that phone will not charge the battery until you flashed it properly, so use other battery or other phone for charging)

[mike67]

ARASH thanks for your reply but the battery is FULL 4.22 volatage ... why does software say not supported at the moment .,. is that normal .. i am reflashing it right now with full battery ,, and will let you know ,, please check the logs

[bimes]

read info for lg A2 is disabled

[the_laser]

1. identify operation only supported for semc phones.
2. write rom file, it will end with error, that is normal.
3. write all files from firmware after that, they must flash succefully. if error came on that point, phone hardware faulty.
4. finally, write gdfs from setool2 dist to fix network problem.

[mike67]

Thanks you laser

My phone flashed perfectly .. still the phone is now turning on LG on screen and than off ...

I have one more question , do i have to customise ?

I just put 3 files and flashed it again and it was ok as here in logs but i didnt check customise ,,, also i have not written gdfs yet ,,, i just tried to turn on phone after flashing completed ...

Please guide me from this point ...

thanks again laser
Mike

[mike67]

LOGS FOR ABOVE POST

ALSO WROTE GDFS AND UNLOCK AND REPAIR but still phone comes onn LG on screen and than OFF


v0.915057/UNI
CARD SERIAL: 00014178
Loaded 51 flash descriptors
SIGNED MODE (USING SERVER)
CFG:100000000000
ChipID:C802,EMP protocol:0401
BOOTROM MODE DETECTED
OTP DBG: [1,54,0,35473801095967]
OTP LOCKED:1 CID:54 PAF:0 IMEI:35473801095967 CERT:BROWN
LDR:070413 1407 HYDCXC1721610_A2_DB31XX_PRODUCTION_LOADER_ACC_SDRA M_P3E
LDR CAPS:SYSTEM SIGNATURE
LDR:070609 0828 HYDCXC1721611_1A2_DB31XX_PRODUCTION_LOADER_APP_SDR AM_NAND_P3F
LDR CAPS:SYSTEM FLASH GDFS FILESYSTEM
writing "C:\Documents and Settings\AKBER NATHOO\Desktop\KU580\cxc000000_U300_PHONE_MCP_NAND _B26.ssw"
ALLOWED DOMAINS:BLUE BROWN RED
MAXIMUM CID:54
Will flash 383 blocks...
ssw file accepted
writing "C:\Documents and Settings\AKBER NATHOO\Desktop\KU580\KU580_FS_Img_ES.ssw"
ALLOWED DOMAINS:BLUE BROWN
MAXIMUM CID:54
Will flash 1174 blocks...
ssw file accepted
writing "C:\Documents and Settings\AKBER NATHOO\Desktop\KU580\KU580_FS_LGPXO_Img.ssw"
ALLOWED DOMAINS:BLUE BROWN RED
MAXIMUM CID:54
Will flash 307 blocks...
ssw file accepted
Phone detached
SIGNED MODE (USING SERVER)
CFG:100100000000
ChipID:C802,EMP protocol:0401
BOOTROM MODE DETECTED
OTP DBG: [1,54,0,35473801095967]
OTP LOCKED:1 CID:54 PAF:0 IMEI:35473801095967 CERT:BROWN
LDR:070413 1407 HYDCXC1721610_A2_DB31XX_PRODUCTION_LOADER_ACC_SDRA M_P3E
LDR CAPS:SYSTEM SIGNATURE
LDR:070609 0828 HYDCXC1721611_1A2_DB31XX_PRODUCTION_LOADER_APP_SDR AM_NAND_P3F
LDR CAPS:SYSTEM FLASH GDFS FILESYSTEM
writing "C:\Documents and Settings\AKBER NATHOO\Desktop\SETOOL\v0.915057\gdfs_in_bin_format \A2\Ku580\ku580_gdfs.zip"
bad file, will not flash it.
Elapsed: 26 secs.
SIGNED MODE (USING SERVER)
CFG:100100000000
Will write GDFS now.
ChipID:C802,EMP protocol:0401
BOOTROM MODE DETECTED
OTP DBG: [1,54,0,35473801095967]
OTP LOCKED:1 CID:54 PAF:0 IMEI:35473801095967 CERT:BROWN
LDR:070413 1407 HYDCXC1721610_A2_DB31XX_PRODUCTION_LOADER_ACC_SDRA M_P3E
LDR CAPS:SYSTEM SIGNATURE
LDR:070609 0828 HYDCXC1721611_1A2_DB31XX_PRODUCTION_LOADER_APP_SDR AM_NAND_P3F
LDR CAPS:SYSTEM FLASH GDFS FILESYSTEM
will write 254 units
done
will write 1059 units
done
Phone detached
Elapsed: 230 secs.
SIGNED MODE (USING SERVER)
CFG:100000000000
PROCEDURE WAS STOPPED BY USER
FAILED TO SETUP PHONE
Elapsed: 122 secs.
SIGNED MODE (USING SERVER)
CFG:100000000000
ChipID:C802,EMP protocol:0401
BOOTROM MODE DETECTED
OTP DBG: [1,54,0,35473801095967]
OTP LOCKED:1 CID:54 PAF:0 IMEI:35473801095967 CERT:BROWN
not supported at the moment
Elapsed: 9 secs.
SIGNED MODE (USING SERVER)
CFG:100000000000
ChipID:C802,EMP protocol:0401
BOOTROM MODE DETECTED
OTP DBG: [1,54,0,35473801095967]
OTP LOCKED:1 CID:54 PAF:0 IMEI:35473801095967 CERT:BROWN
LDR:070413 1407 HYDCXC1721610_A2_DB31XX_PRODUCTION_LOADER_ACC_SDRA M_P3E
LDR CAPS:SYSTEM SIGNATURE
LDR:070609 0828 HYDCXC1721611_1A2_DB31XX_PRODUCTION_LOADER_APP_SDR AM_NAND_P3F
LDR CAPS:SYSTEM FLASH GDFS FILESYSTEM
WRITING CLEAR SIMLOCK UNITS...
ALL UNLOCK/LOCK CODES SET TO "57804404"
phone detached
Elapsed: 63 secs.

[the_laser]

4. finally, write gdfs from setool2 dist to fix network problem.
5. unlock phone if you wrote gdfs.

[mike67]

LASER THANKS I ALREADY DID THAT IF YOU CHECK THE ABOVE LOGS .. FLASHED WRITTEN GDFS AND UNLOCKED <, PHONE STILL TURNING ON TO LG HANG AND THAN OFF

THANKS
MIKE

[the_laser]

i can not help you more.

[mike67]

THnks Laser

I reunlocked the phone and now phone booting but on the screen only LG comes ,,it doesnt go beyond LG ,, but phone has booted and is working ,,, u can make calls recv calls ,, but on screen only LG ,, This is wierd now

thanks
Mike

[Max_B]

THnks Laser

I reunlocked the phone and now phone booting but on the screen only LG comes ,,it doesnt go beyond LG ,, but phone has booted and is working ,,, u can make calls recv calls ,, but on screen only LG ,, This is wierd now

thanks
Mike

Hardware !

Most probably flex cable problem

BR
Max_B

[Gsmsupport]

sorry i need an help if possible for flashing this Ku580 need all three files and gdfs right but as setting what i need to put.
Tanks

[Gsmsupport]

Ok no need finally i solved problem of no network in this way flashed gdsf in misc file and used this setting Signed mode, Enable alternative bypass and disable flash mode Acvtivation for SemcA2 installed driver Ku580 and after first backup and after write gdfs by holding 2+5 and insert usb cable speed set at 460800. Phone now work perfect.
Tanks