sharp sh 903sh not power on after flash

[biochemistali]

need little assistance in this case. sharp sh903 not power on after flash, also tried gdfs any suggestion?
v0.915057/UNI
CARD SERIAL: 0000
Loaded 51 flash descriptors
Connecting to UFS...
Found 2 FTDI device(s).
UFS #72174 READY
CFG:000100001000
ChipID:7100,EMP protocol:0301

PHONE STATE: "DEVELOPER"
FLASH CID: 0024
Speed:921600
BAUDRATE DECREASED
OTP: LOCKED:1 CID:24 PAF:0 IMEI:35472100437144 CERT:BROWN
LDR:040622 1339 LLECXC1325712_PRODUCTION P2J
FLASH ID:B00B
SWITCHING TO "USB"...
interface not changed
writing "C:\Documents and Settings\taha mobiles\Desktop\eu903patch\eu903patch_part1.ssw"
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is: 528
Will flash 528 blocks...
writing "C:\Documents and Settings\taha mobiles\Desktop\eu903patch\eu903patch_part2.ssw"
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is: 232
Will flash 232 blocks...
Elapsed: 1643 secs.
CFG:000100001000
Will write GDFS now.
PROCEDURE WAS STOPPED BY USER
FAILED TO SETUP PHONE
Elapsed: 36 secs.
CFG:000100001000
Will write GDFS now.
PROCEDURE WAS STOPPED BY USER
FAILED TO SETUP PHONE
Elapsed: 6 secs.
Closing UFS at your request.
Connecting to UFS...
Found 1 FTDI device(s).
UFS #72174 READY
CFG:000100001000
PROCEDURE WAS STOPPED BY USER
FAILED TO SETUP PHONE
Elapsed: 17 secs.
Closing UFS at your request.
Connecting to UFS...
Found 1 FTDI device(s).
UFS # READY
CFG:000100001000
ChipID:7100,EMP protocol:0301

PHONE STATE: "DEVELOPER"
FLASH CID: 0024
Speed:921600
BAUDRATE DECREASED
OTP: LOCKED:1 CID:24 PAF:0 IMEI:35472100437144 CERT:BROWN
LDR:040622 1339 LLECXC1325712_PRODUCTION P2J
FLASH ID:B00B
SWITCHING TO "USB"...
interface not changed
Will read 00020000 bytes,starting from 44000000
Reading:131072 bytes
ReadFLS: ERROR|GetFlashInfo|
phone detached
Elapsed: 11 secs.
CFG:000100001000
ChipID:7100,EMP protocol:0301

PHONE STATE: "DEVELOPER"
FLASH CID: 0024
Speed:921600
BAUDRATE DECREASED
OTP: LOCKED:1 CID:24 PAF:0 IMEI:35472100437144 CERT:BROWN
LDR:040622 1339 LLECXC1325712_PRODUCTION P2J
FLASH ID:B00B
Sharp3G patching started.
FOUND MODEL J500 REV 1.21 VER 1.046
patch#0 found
patch#1 not found
patch#2 not found
PROCEDURE WAS STOPPED BY USER
can't get packet start.
INVALID SEARCH RESPONSE (00000000)
Setting up GDFS...
failed to setup GDFS
Unlock FAILED
Elapsed: 77 secs.
CFG:000100001000
Will write GDFS now.
ChipID:7100,EMP protocol:0301

PHONE STATE: "DEVELOPER"
FLASH CID: 0024
Speed:921600
BAUDRATE DECREASED
OTP: LOCKED:1 CID:24 PAF:0 IMEI:35472100437144 CERT:BROWN
LDR:040622 1339 LLECXC1325712_PRODUCTION P2J
FLASH ID:B00B
Setting up GDFS...
will write 747 units
done
Phone detached
Elapsed: 62 secs.
CFG:000100001000
ChipID:7100,EMP protocol:0301

PHONE STATE: "DEVELOPER"
FLASH CID: 0024
Speed:921600
BAUDRATE DECREASED
OTP: LOCKED:1 CID:24 PAF:0 IMEI:35472100437144 CERT:BROWN
LDR:040622 1339 LLECXC1325712_PRODUCTION P2J
FLASH ID:B00B
Sharp3G patching started.
FOUND MODEL J500 REV 1.21 VER 1.046
patch#0 not found
patch#1 not found
patch#2 not found
patch#3 not found
patch#4 not found
Setting up GDFS...
IMEI MISMATCH !!!! POSSIBLE STOLEN PHONE !!!!!
ORIGINAL IMEI:35472100437144
CURRENT IMEI:00000000000000
WRITING CLEAR SIMLOCK UNITS...
ALL UNLOCK/LOCK CODES SET TO "26804152"
SIGNING...
Unlock FINISHED
Elapsed: 75 secs.

[the_laser]

use
"103Q_9121_121(tw903).rar"
or
"AA240_9121_121(tw903).rar"

then unlock phone.

after flash, power on phone with "8" button held - so phone will init itself.

[biochemistali]

yes, your trick worked. now it powered on but blinking at please wait. now how to solve this?


v0.915057/UNI
CARD SERIAL:
Loaded 51 flash descriptors
Connecting to UFS...
Found 1 FTDI device(s).
UFS #72174 READY
CFG:000000000000
ChipID:7100,EMP protocol:0301

PHONE STATE: "DEVELOPER"
FLASH CID: 0024
Speed:921600
BAUDRATE DECREASED
OTP: LOCKED:1 CID:24 PAF:0 IMEI:35472100437144 CERT:BROWN
LDR:040622 1339 LLECXC1325712_PRODUCTION P2J
FLASH ID:B00B
SWITCHING TO "USB"...
interface not changed
writing "C:\Documents and Settings\taha mobiles\Desktop\shrap sh 903sh setool flash files\AA240_9121_121(tw903)\AA240_9121_121_p1.ssw"
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is: 528
Will flash 528 blocks...
writing "C:\Documents and Settings\taha mobiles\Desktop\shrap sh 903sh setool flash files\AA240_9121_121(tw903)\AA240_9121_121_p2.ssw"
CURRENT FLASH FILE CID:254
SSW uses dynamic hash, dynamic hash len is: 232
Will flash 232 blocks...
Elapsed: 1302 secs.
CFG:000000000000
ChipID:7100,EMP protocol:0301

PHONE STATE: "DEVELOPER"
FLASH CID: 0024
Speed:921600
BAUDRATE DECREASED
OTP: LOCKED:1 CID:24 PAF:0 IMEI:35472100437144 CERT:BROWN
LDR:040622 1339 LLECXC1325712_PRODUCTION P2J
FLASH ID:B00B
Sharp3G patching started.
FOUND MODEL 9121 REV 1.21 VER AA240
patch#0 found
patch#1 found
patch#2 not found
patch#3 not found
patch#4 not found
Setting up GDFS...
WRITING CLEAR SIMLOCK UNITS...
ALL UNLOCK/LOCK CODES SET TO "17716311"
SIGNING...
Unlock FINISHED
Elapsed: 97 secs.

[bimes]

press # + power and format it

[biochemistali]

when i try to power it on while holding 8 button(key) soft information comes then after a few seconds please wait then a flower like thing rotates in the center and a line of chines hand writing, then agin please wait then flower rotates. what to do

[bimes]

what, when u hold # (or 9 i'm confused)+ power

[biochemistali]

ititialize boot
current version
sram initialize completed
flash format started
filesystem format then after about 30 sec please wait then black screen then after 5 sec please wait.

[the_laser]

phone should finish format and write that on screen.
if format is not completed, perhaps, flash ic bad.

just to be sure, write full readouts, unlock phone after and retry.

[biochemistali]

full read out means ? gdfs? am i right?

[bimes]

Index of .. / download / sharp phones / READOUTS / SH903SH /

[the_laser]

mean readout directory on support.

[biochemistali]

yes. my problem is solved. i gave 10 min rest to set then tried to format.when format completed it came to the real life. thanks the master the_LASER AND bimes for giving me such helpful advices. it has been a nice experience for me.
br
hamid

[..::online::..]

how to use rest file